Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Claris® Nominal Depth Pleated Filter Cartridges | Pall Shop

Order Products

Cartridge Length (Metric)

1016 mm

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, DOE with elastomer gasket seals & end caps

Product ID: CLR540DOEN
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, DOE Santoprene gasket seal

Product ID: CLR540H21
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, EPDM, SOE fin end external 222 O-rings

Product ID: CLR540M8E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, SOE metal spring/polypropylene cap saw cut end

Product ID: CLR540SI
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridge, 5 µm, 40 in, Single Open End with Flat Closed End, 2 locking Tabs and External 226 O-rings

Product ID: CLR540M6WS480
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, SOE flat closed end external 222 O-rings

Product ID: CLR540M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, silicone, SOE flat closed end external 222 O-rings

Product ID: CLR540M3S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Fluorocarbon Elastomer

Product ID: CLR540M8V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, silicone, SOE fin end external 222 O-rings

Product ID: CLR540M8S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, SOE plastic spring assembly saw cut end

Product ID: CLR540XK
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 40 inches, Fluorocarbon Elastomer

Product ID: CLR7540M8V
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 40 inches, Nitrile

Product ID: CLR7540M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes
48 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English