Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Pleated Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Filter Cartridges
Pleated Filter Cartridges
String-Wound Filter Cartridges
String-Wound Filter Cartridges

Order Products

Product Sub Type

Pleated Filters

Cartridge Length (Imperial)

40 in

Product Type

Filter Cartridges

Cartridge Length (Metric)

1016 mm

DFT Classic®, Filter Cartridges, Removal Rating 100 μm, Bleached cotton, Length 40 Inches, 316 stainless steel, Bulk packaging

Product ID: C100AW40S
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
100 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Cartridge Outer Diameter (OD) (Imperial)
2.5 in
Cartridge Outer Diameter (OD) (Metric)
6.4 cm
See All Attributes

Ultipor® N66 Filter Cartridges, Nylon Hardware, 0.45 µm Single Layer, 40 in, Single Open Ended Code 7, Silicone Elastomer O-ring

Product ID: ABN4NB7BWH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone Elastomer
Gasket O-Ring Code
H4
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Silicone Elastomer, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Silicone Elastomer, SOE fin end external 222 O-rings

Product ID: PFT540USM8W480
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Duo-Fine® , Filter Cartridges, Removal Rating 3 μm, Length 40 Inches, Nitrile, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFN340UN
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
3 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, EPDM, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, EPDM, SOE fin end external 222 O-rings

Product ID: PFT3040UEM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
30 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 40 Inches, silicone, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 40 Inches, silicone, SOE fin end external 222 O-rings

Product ID: PFT340USM89359
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm

Discontinued

This part is no longer available. Please contact us for more information.

Duo-Fine® , Filter Cartridges, Removal Rating 0.2 μm, Length 40 Inches

Product ID: DFN0240UEM26
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.2 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Change Out Differential Pressure
2.4 bard
Cartridge Outer Diameter (OD) (Imperial)
2.6 in
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, Nitrile product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, Nitrile

Product ID: PFT3040UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
30 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 40 Inches, EPDM product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 40 Inches, EPDM

Product ID: PFT0240UEM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 40 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 40 Inches, Fluorocarbon Elastomer

Product ID: PFT0240UVM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, silicone, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, silicone, SOE fin end external 222 O-rings

Product ID: PFT540USM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Supor® Beverage Filter Cartridges, 40in, Silicone Elastomer

Product ID: AB4SBB7WH4
Unit of Measure
1/EA
Min Order Qty
1
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone Elastomer
Gasket O-Ring Code
H4
Maximum Differential Pressure
5.5 bard (79.8 psid) (forward pressure)
See All Attributes
77 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English