Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Accessories Spare Parts
Accessories Spare Parts
Air Breathers
Air Breathers
Air Gas Vent Filters
Air Gas Vent Filters
Backwash Filters
Backwash Filters
Cabin Air Filters
Cabin Air Filters
Centrifugal Filters
Centrifugal Filters
Ceramic Filters
Ceramic Filters
Cleanliness Cabinet Service Instruments
Cleanliness Cabinet Service Instruments
Coalescers
Coalescers
Depth Filter Sheets
Depth Filter Sheets
Depth Filtration
Depth Filtration
Diagnostic Monitoring Equipment
Diagnostic Monitoring Equipment
Disc Filters
Disc Filters
Filter Capsules
Filter Capsules
Filter Cartridges
Filter Cartridges
Housings Vessels Assemblies
Housings Vessels Assemblies
Integrity Test Devices
Integrity Test Devices
IV Filters
IV Filters
Large Format Filters
Large Format Filters
Last Chance Filter Discs
Last Chance Filter Discs
Last Chance Filter Elements
Last Chance Filter Elements
Lenticular Filters
Lenticular Filters
Media Membranes
Media Membranes
Membrane Filters
Membrane Filters
Metal Filters
Metal Filters
Microza Hollow Fiber Modules
Microza Hollow Fiber Modules
Oil Purifiers
Oil Purifiers
Services
Services
Supor-EKV
Supor-EKV
Systems
Systems
Vent Filters
Vent Filters

Order Products

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, Fluorocarbon Elastomer, SOE fin end external 225 O-ring product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, Fluorocarbon Elastomer, SOE fin end external 225 O-ring

Product ID: PFT1030UVM22LGID
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer

Product ID: PFT220UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
2 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, EPDM, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, EPDM, SOE fin end external 222 O-rings

Product ID: PFT3040UEM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
30 µm
PFT 3-29.25US 263 product photo

PFT 3-29.25US 263

Product ID: PFT32925US263
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring

Product ID: PFT530UEM22
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm
PFT 5-30UEB-1X-BLK 414 product photo

PFT 5-30UEB-1X-BLK 414

Product ID: PFT530UEB1XBLK414
Unit of Measure
1/EA
Min Order Qty
1
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 39 Inches product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 39 Inches

Product ID: PFT539UEM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Marksman™, Large Format Filters, Filter Grade 10 µm, polypropylene, Size 2 bag, Fluorocarbon elastomer, Plastic self-adjusting flange, Pall Marksman Series vessels, Rosedale4, Strainrite, Krystil Klear

Product ID: PFTM102UVPFA
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
Size 2 bag
Filter Grade
10 µm
Hardware Material
Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152 mm
See All Attributes

Marksman™ High Flow, Large Format Filters, Filter Grade 10 µm, polypropylene, Length 60 Inches, 10% glass fiber reinforced polypropylene End caps

Product ID: PFTM1060UHFH1
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
60/1524 inches/mm
Filter Grade
10 µm
Hardware Material
Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6.3 in
Outside Diameter (Metric)
160 mm
See All Attributes

Marksman™ High Flow, Large Format Filters, Filter Grade 20 µm, polypropylene, Length 20 Inches, Fluorocarbon Elastomer O-ring

Product ID: PFTM2020UHFH
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
20/508 inches/mm
Filter Grade
20 µm
Hardware Material
Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6.3 in
Outside Diameter (Metric)
160 mm
See All Attributes

Marksman™, Large Format Filters, Filter Grade 20 µm, polypropylene, Size 2 bag, No flange

Product ID: PFTM202UNF
Unit of Measure
4/EA
Min Order Qty
4

Marksman™ High Flow, Large Format Filters, Filter Grade 3 µm, polypropylene, Length 20 Inches, Fluorocarbon Elastomer O-ring

Product ID: PFTM320UHFH
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
20/508 inches/mm
Filter Grade
3 µm
Hardware Material
Polypropylene
Media Material
Polypropylene
Outside Diameter (Imperial)
6.3 in
Outside Diameter (Metric)
160 mm
See All Attributes
9,848 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English