Oenoclear™ II Pleated Filter Cartridges

 

Food Contact Compliance

 

• Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
• Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

 

• Cartridges produced in a controlled environment 
• Manufactured according to ISO 9001:2015 certified Quality Management System

 

• Liquid removal rating: 0.8 micron @ 99.98 % efficiency (β5000)

 

Maximum Differential Pressure	Operating Temperature
5.5 bard (80 psid) (forward)	50 °C (122 °F)
4.1 bard (60 psid) (forward)	80 °C (176 °F)
500 mbard (7 psid) (reverse)	20 °C (68 °F)

 

Sterilization and Sanitization

Media	Temperature	Cumulative Time3
Steam	121 °C (250 °F)	25 hours
Hot Water	90 °C (194 °F)	50 hours
Peroxyacetic acid based sanitizer (300 ppm total peroxides)	20 °C (68 °F)	50 hours

 

Typical Flow Rates⁴

 

 

¹The Oenoclear II Filter Cartridge liquid retention rating is based on modified OSU-F2 test.

²Compatible fluids are defined as those which do not swell, soften or attack any of the filter components.

³Measured under laboratory test conditions. The actual cumulative time depends on the process conditions. Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use. Contact Pall for recommended procedures.

⁴Typical initial clean media ΔP 254 mm (10”) cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508 mm, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.