Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Pleated Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Filter Cartridges
Pleated Filter Cartridges

Order Products

Brand

Poly-Fine®

Availability

In Stock

Cartridge Length (Imperial)

20 in

Poly-Fine® XLD Filter Cartridges, Removal Rating 40 μm, Polypropylene, Length 20 inches, silicone, SOE fin end external 226 O-rings

Product ID: XLD4020USM7
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
40 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, silicone, DOE industrial, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, silicone, DOE industrial, No Bubble Test

Product ID: PFT0820US
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, EPDM, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: PFT0820UEM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm

Profile® UP Filter Cartridges, Removal Rating 50 μm, Length 20 inches

Product ID: AB2UY5007H1
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
50 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
Cartridge Outer Diameter (OD) (Metric)
7 cm
See All Attributes

Profile® UP Filter Cartridges, Removal Rating 70 μm, Length 20 inches

Product ID: AB2UY7007H4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
70 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

Poly-Fine® XLD Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 inches, Nitrile, DOE industrial

Product ID: XLD320UN
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
3 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Nitrile
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 Inches, Nitrile product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 Inches, Nitrile

Product ID: PFT1020UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT320UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, silicone, SOE fin end external 222 O-rings, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, silicone, SOE fin end external 222 O-rings, No Bubble Test

Product ID: PFT0820USM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, Silicone Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, Silicone Elastomer

Product ID: PFT02520USM7W480
Unit of Measure
12/EA
Min Order Qty
12
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 20 Inches, Nitrile, DOE industrial, 100 Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 20 Inches, Nitrile, DOE industrial, 100 Bubble Test

Product ID: PFT04520UNB
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 20 Inches, EPDM product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 20 Inches, EPDM

Product ID: PFT0220UE
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm
13 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English