Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges

Order Products

Cartridge Length (Imperial)

40 in

Gasket / O-Ring Material

Nitrile

Cartridge Length (Metric)

1016 mm

Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 inches, Nitrile

Product ID: CLR3040M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
30 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, DOE with elastomer gasket seals & end caps

Product ID: CLR540DOEN
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, SOE flat closed end external 222 O-rings

Product ID: CLR540M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, SOE fin end external 222 O-rings

Product ID: CLR540M8N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 40 inches, Nitrile

Product ID: CLR7540M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 40 Inches, Nitrile product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 40 Inches, Nitrile

Product ID: PFT02540UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Nitrile, SOE flat closed end external 222 O-ring product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Nitrile, SOE flat closed end external 222 O-ring

Product ID: PFT1040UNM18
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Nitrile, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Nitrile, DOE industrial

Product ID: PFT1040UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, Nitrile product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 40 Inches, Nitrile

Product ID: PFT3040UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
30 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Nitrile, product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Nitrile,

Product ID: PFT540UNSI
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Poly-Fine® II Filter Cartridges, Removal Rating 1 μm, Length 40 inches, Nitrile

Product ID: QMPT010400UNM220
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
1 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
Change Out Differential Pressure
2.4 bard
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® II Filter Cartridges, Removal Rating 5 μm, Length 40 inches, Nitrile

Product ID: QMPT050400UN
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
End Configuration Code
Blank
See All Attributes
46 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English