Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges

Order Products

Gasket / O-Ring Material

EPDM

Nexis® A Series Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, EPDM, Double Open Ended(DOE) with end caps and elastomer gaskets

Product ID: NXAQ1020UDOEE12
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Nexis® A Series Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches, EPDM, Single Open Ended with double O-ring bayonet lock and fin

Product ID: NXAQ110UM7E12
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Nexis® A Series Filter Cartridges, Polypropylene, Length 20 inches, EPDM, Single Open Ended with double O-ring bayonet lock and fin

Product ID: NXAQ4020UM7E12
Unit of Measure
12/EA
Min Order Qty
12
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
End Configuration Code
M7
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Nexis® A Series Filter Cartridges, Removal Rating 5 μm, Polypropylene, EPDM, Double Open Ended(DOE) with end caps and elastomer gaskets

Product ID: NXAQ530UDOEE12
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Gasket / O-Ring Material
EPDM
End Configuration Code
DOE
End Configuration
DOE - Double Open Ended(DOE) with end caps and elastomer gaskets
Cartridge Type
NXAQ
See All Attributes
Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess product photo

Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess

Product ID: NXT1010UM20E
Unit of Measure
30/EA
Min Order Qty
60
Micron
10 micron

Discontinued

This part is no longer available. Please contact us for more information.

Nexis® T Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 20 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: NXT5020UM3E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
50 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.
Nexis® T Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess product photo

Nexis® T Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess

Product ID: NXT510UM20E
Unit of Measure
30/EA
Min Order Qty
60
Micron
5 micron

Discontinued

This part is no longer available. Please contact us for more information.

Nexis® T Filter Cartridges, Removal Rating 75 μm, Polypropylene, Length 10 inches, EPDM, DOE with elastomer gasket seals and end caps

Product ID: NXT7510UDOEE
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
75 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II Filter Cartridge, PFT02520UEW480 product photo

Poly-Fine® II Filter Cartridge, PFT02520UEW480

Product ID: PFT02520UEW480
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
PFT 0.45-20UE-M7W 480 product photo

PFT 0.45-20UE-M7W 480

Product ID: PFT04520UEM7W480
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm

Discontinued

This part is no longer available. Please contact us for more information.
PFT 0.45-30UEW 480 product photo

PFT 0.45-30UEW 480

Product ID: PFT04530UEW480
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 39 Inches product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 39 Inches

Product ID: PFT0839UEM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
359 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English