Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges

Order Products

Gasket / O-Ring Material

EPDM

Poly-Fine® ARD, Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 10 Inches

Product ID: ARD2010UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
20 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® ARD, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 Inches, EPDM, DOE with elastomer gasket seals and end caps

Product ID: ARD510UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring

Product ID: PFT530UEM22
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 39 Inches product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 39 Inches

Product ID: PFT539UEM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: PFT5010UEM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
50 µm

Poly-Fine® XLD Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: XLD1010UEM3165
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® XLD Filter Cartridges, Polypropylene, EPDM, Double-Open End (DOE)

Product ID: XLD30TFUE147
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polypropylene
Gasket / O-Ring Material
EPDM
End Configuration Code
No code
End Configuration
No Code - Double-Open End (DOE)
Gasket O-Ring Code
E
Cage, Core, Fin End and Endcap
Polypropylene
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® XLD Filter Cartridges, Removal Rating 1.5 μm, Polypropylene, Length 20 inches, EPDM, DOE industrial

Product ID: XLD1520UE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
1.5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® XLD Filter Cartridges, Removal Rating 1.5 μm, Polypropylene, Length 10 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: XLD1510UEM3165
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
1.5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® XLD Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 10 inches, EPDM, SOE fin end external 226 O-rings

Product ID: XLD310UEM7
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
3 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® XLD Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 10 inches, EPDM

Product ID: XLD310UEM3BLK490
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
3 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® XLD Filter Cartridges, Polypropylene, Length 30 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: XLD3030UEM3
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
EPDM
End Configuration Code
M3
See All Attributes
359 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English