Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges
Large Format Filters
Large Format Filters

Order Products

Availability

In Stock

Featured product

false

Cartridge Length (Imperial)

40 in

Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, silicone, SOE fin end external 226 O-rings

Product ID: NXT1040UM7S
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Pall Fit 3M Retrofit Large Format Filters, Removal Rating 5 μm, Length 40 inches, Silicone

Product ID: RPF009UY640S0050S
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
40/1016 inch/mm
Filter Grade
5 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
DFT Classic®, Filter Cartridges, Removal Rating 30 μm, Length 40 Inches, 304 stainless steel product photo

DFT Classic®, Filter Cartridges, Removal Rating 30 μm, Length 40 Inches, 304 stainless steel

Product ID: G030AW40A1PK
Unit of Measure
10/EA
Min Order Qty
10
Packaging
Individually wrapped
See All Attributes

Claris® Filter Cartridge, 10 µm, 40 in, Single Open Ended with Fin End and External 222 O-rings

Product ID: CLR1040M8WE480
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Ethylene Propylene Rubber
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, DOE Santoprene gasket seal

Product ID: CLR140H21
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 40 inches, Nitrile, SOE flat closed end external 222 O-ring

Product ID: CLR2040M18N
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
20 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, DOE industrial (no end caps), Polypropylene Core

Product ID: CLR540M3HN
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Change Out Differential Pressure
2.4 bard
See All Attributes

Claris® Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 inches, Nitrile, SOE fin end external 222 O-rings

Product ID: CLR540M8N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Duo-Fine® , Filter Cartridges, Removal Rating 0.2 μm, Length 40 Inches

Product ID: DFN0240UEM26
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.2 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Change Out Differential Pressure
2.4 bard
Cartridge Outer Diameter (OD) (Imperial)
2.6 in
See All Attributes

Duo-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Length 40 Inches, silicone, SOE flat closed end external 222 O-rings

Product ID: DFN04540USM3
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.45 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Silicone
End Configuration Code
M3
See All Attributes

Marksman™, Large Format Filters, Filter Grade 3 µm, Borosilicate micro fiberglass with acrylic binder, Length 40 Inches

Product ID: DFNM34UNPFA
Unit of Measure
4/EA
Min Order Qty
4
Cartridge Length
40/1016 inches/mm
Filter Grade
3 µm
Hardware Material
Polypropylene
Outside Diameter (Imperial)
6 in
Outside Diameter (Metric)
152 mm
Cartridge Length (Imperial)
40 in
See All Attributes

Duo-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Length 40 Inches, Nitrile, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFNT04540UN
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.45 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes
46 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English