Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Order Products

Industries

Microelectronics

Product Sub Type

Pleated Filters

Product Type

Filter Cartridges

WFN 1.2-9.75UF-M10 300

Product ID: WFN12975UFM10300
Unit of Measure
1/EA
Min Order Qty
1

WFN 0.45-10US-M20 300

Product ID: WFN04510USM20300
Unit of Measure
1/EA
Min Order Qty
1

CRTG EA92F2QS

Product ID: EA92F2QS
Unit of Measure
1/EA
Min Order Qty
1

0.2 µm, 20" Single Open Ended (Code 7) with Silicone Seals

Product ID: WFN0220USM7300
Unit of Measure
1/EA
Min Order Qty
1

PUY01ZU010ZJ

Product ID: PUY01ZU010ZJ
Unit of Measure
1/EA
Min Order Qty
1
PolyFine-II Filter Cartridge, Highly asymmetric polysulfone, 0.2 µm, 10 in, Nitrile (standard gaskets) , M3 product photo

PolyFine-II Filter Cartridge, Highly asymmetric polysulfone, 0.2 µm, 10 in, Nitrile (standard gaskets) , M3

Product ID: PFT0210UNM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm

ARD 1-9.75UE-DOE

Product ID: ARD1975UEDOE
Unit of Measure
1/EA
Min Order Qty
1

PFC10-C5

Product ID: PFC10C5
Unit of Measure
1/EA
Min Order Qty
1
PolyFine-II Filter Cartridge, Polyproylene, 3 µm, 30 in, Silicone Elastomer, M8 product photo

PolyFine-II Filter Cartridge, Polyproylene, 3 µm, 30 in, Silicone Elastomer, M8

Product ID: PFT330USM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm

WFN 0.45-10US-M7 300

Product ID: WFN04510USM7300
Unit of Measure
1/EA
Min Order Qty
1

MPF2230F002EH1

Product ID: MPF2230F002EH1
Unit of Measure
1/EA
Min Order Qty
1

CHEM-VENT FILT

Product ID: EA91F1MX
Unit of Measure
1/EA
Min Order Qty
1

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :