Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Pleated Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Filter Cartridges
Pleated Filter Cartridges

Order Products

Product Sub Type

Pleated Filters

Product Type

Filter Cartridges

Cartridge Length (Metric)

762 mm

Duo-Fine® II, Filter Cartridges, Removal Rating 1 μm, Length 30 Inches, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFNT130UE
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
End Configuration
Blank - DOE with elastomer gasket seals & end caps
Change Out Differential Pressure
2.4 bard
See All Attributes

HDC® II, Filter Cartridges, Removal Rating 10 μm, Length 30 Inches, silicone

Product ID: AB3J1007H4
Unit of Measure
6/EA
Min Order Qty
6
Removal Rating
10 µm
Membrane Material
Polypropylene
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings with locking tabs product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings with locking tabs

Product ID: PFT0830USM4
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 225 O-ring

Product ID: PFT1030UEM22
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm

Ultipor® GF Plus, Filter Cartridges, Length 30 Inches

Product ID: AB3U2-20Z7H15
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket O-Ring Code
H15

This product is currently not available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, EPDM, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: PFT02530UEM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 30 Inches, Nitrile, DOE industrial, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 30 Inches, Nitrile, DOE industrial, No Bubble Test

Product ID: PFT330UN
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm

Duo-Fine® , Filter Cartridges, Removal Rating 0.2 μm, Length 30 Inches, Fluorocarbon Elastomer, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFNT0230UV
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.2 µm
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes

HDC® II, Filter Cartridges, Length 30 Inches, silicone

Product ID: AB3J0067H4
Unit of Measure
6/EA
Min Order Qty
6
Membrane Material
Polypropylene
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial

Product ID: PFT330US
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings

Product ID: PFT02530UTM7
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, EPDM, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 Inches, EPDM, DOE industrial

Product ID: PFT1030UE
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
182 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English