Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Order Products

Industries

Biotech

Supracap 50 depth filter capsules are designed for developing and optimizing a process during scale-up and scale-down studies. They can be used to quickly and accurately determine which series and grade of depth filter media will provide the best performance as well as the necessary filtration area required to meet process volume

27 Products In Family

Emflon® PFR Membrane in Novasip™ Capsules have lower installation costs than comparable systems. Its steam sterilizing durability provides a long service life and low maintenance costs. Novasip™ filters use polyethermide because of its strong withstanding features against elevated temperature and pressure. Designed with air and vent applications Novasip™ filters can be used in a range of operating conditions.

Kleenpak™ Capsules with Posidyne® Membrane meet cleanliness requirement per USP Particulates in Injectable. It features positive Zeta potential for enhanced efficiency in aqueous solutions. Capsules contain a double-layer sterilizing membrane for high reliability and high-quality product. Filters are self-contained and designed for small sterile filtration systems throughout a range of acidic to basic solutions.

Emflon® II Membrane in Kleenpak™ Capsules serves the user's specific systematic needs. Pall offers options including gama-irradiatable, pre-sterilized and custom-made sets. All versions perform to the same top quality standard. Each unit is fully integrity testable and has the highly retentive Emflon II membrane. These capsule filters provide high air flows of both air and gas.

9 Products In Family

Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end product photo

Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end

Product ID: AB05PFA2PVH4
Unit of Measure
1/EA
Min Order Qty
1
Sterilization Option(s)
Suitable for Autoclave or SIP
Filter Cartridge Style
Code 2
Cartridge Length (Metric)
127 mm
See All Attributes

HDC® II Filter Cartridges, Removal Rating 10 μm, Length 20 inches

Product ID: AB2J1007H4
Unit of Measure
6/EA
Min Order Qty
6
Removal Rating
10 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

Profile® Star, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, silicone, Pall Code 7 double O-ring with bayonet lock and finned end

Product ID: AB3A0507H4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes

This product is currently not available. Please contact us for more information.

HDC® II, Filter Cartridges, Removal Rating 6 μm, Length 30 Inches, silicone

Product ID: AB3J0607H4
Unit of Measure
6/EA
Min Order Qty
6
Removal Rating
6 µm
Membrane Material
Polypropylene
Filter Cartridge Style
Code 7
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes
Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 9.75 inches product photo

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 9.75 inches

Product ID: CLR20975
Unit of Measure
36/EA
Min Order Qty
36
Length
24.8 cm / 9.75 in
Micron
20 micron

HDC® II membrane 47 mm diameter discs, 20 µm removal rating, 17 cm² EFA, pack of 25

Product ID: FTKJ200
Unit of Measure
1/EA
Min Order Qty
1
Format
47 mm disc
Removal Rating
20 µm
Effective Filtration Area (Metric)
17 cm²
Membrane Material
Polypropylene
Membrane Brand
HDC II
Industry-Specific Certification
Pharmaceutical Grade
See All Attributes
Emflon® II membrane in Kleenpak™ capsule, 0.2 µm sterilizing grade, 820 cm² EFA, ¼-½ in. hose barb connections, pre-sterilized by gamma irradiation product photo

Emflon® II membrane in Kleenpak™ capsule, 0.2 µm sterilizing grade, 820 cm² EFA, ¼-½ in. hose barb connections, pre-sterilized by gamma irradiation

Product ID: KA2V002PV2S
Unit of Measure
1/EA
Min Order Qty
1
Membrane Material
Polyvinylidene fluoride (PVDF)
Effective Filtration Area (Metric)
820 cm²
See All Attributes

This product is currently not available. Please contact us for more information.

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :