Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Filter Cartridges
Filter Cartridges

Order Products

Product Use

Pre-Filtration

Filter Media

Polypropylene

Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 20 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 20 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings

Product ID: PFTQ220UTM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
2 µm

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, FEP encapsulated Fluorocarbon Elastomer Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, FEP encapsulated Fluorocarbon Elastomer Orings, SOE fin end external 226 O-rings

Product ID: PFTQ0810UFM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings

Product ID: PFTQ0810UTM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 2 μm, Polypropylene, Length 30 Inches, EPDM, SOE fin end external 226 O-rings

Product ID: PFTQ230UEM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
2 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, SOE fin end external 226 O-rings

Product ID: PFTQ1010UEM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
10 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, FEP encapsulated Fluorocarbon Elastomer Orings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, FEP encapsulated Fluorocarbon Elastomer Orings

Product ID: PFTQ320UFM312
Unit of Measure
12/EA
Min Order Qty
12
Micron
3 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, Silicone Elastomer, SOE fin end external 226 O-rings, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, Silicone Elastomer, SOE fin end external 226 O-rings, No Bubble Test

Product ID: PFTQ520USM712
Unit of Measure
12/EA
Min Order Qty
12
Micron
5 µm

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings

Product ID: PFTQ510UTM712
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
5 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, EPDM, DOE – with open end caps/gasket product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, EPDM, DOE – with open end caps/gasket

Product ID: PFTQ520UE12
Unit of Measure
12/EA
Min Order Qty
12
Micron
5 µm
Nexis® T Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess product photo

Nexis® T Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches, EPDM, SOE with internal O-rings (same as M10) closed end with deep recess

Product ID: NXT110UM20E
Unit of Measure
30/EA
Min Order Qty
30
Micron
1 micron
Nexis® A Series Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, EPDM, SOE flat closed end external 222 O-rings product photo

Nexis® A Series Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: NXA1020UM3E
Unit of Measure
12/EA
Min Order Qty
12
Micron
10 micron
Nexis® A Series Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, DOE Santoprene gasket seal product photo

Nexis® A Series Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, DOE Santoprene gasket seal

Product ID: NXA1020UH21
Unit of Measure
12/EA
Min Order Qty
12
Micron
10 micron
830 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English