Claris® Series Melt Blown Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Shop Claris Series Filter Cartridges

Order Products

Industries

Oil & Gas

Filter Media

Polypropylene

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 29.5 inches

Product ID: CLR10295
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
29.5 in
Cartridge Length (Metric)
749 mm
Cartridge Length (Metric)
74.9 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 inches, silicone, SOE fin end external 226 O-rings

Product ID: CLR1030M7S
Unit of Measure
12/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 inches, Nitrile, DOE with elastomer gasket seals & end caps

Product ID: CLR1040DOEN
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches, silicone, SOE flat closed end external 222 O-rings

Product ID: CLR110M3S
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches

Product ID: CLR13042
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
NA
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 20 inches, EPDM

Product ID: CLR120M8E
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, silicone, SOE flat closed end, external 222 O-rings

Product ID: CLR130M3S
Unit of Measure
12/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, EPDM, SOE fin end external 222 O-rings

Product ID: CLR140M8E
Unit of Measure
12/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 50 inches

Product ID: CLR150
Unit of Measure
20/EA
Min Order Qty
20
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
50 in
Cartridge Length (Metric)
1270 mm
Cartridge Length (Metric)
127 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE industrial (no end caps) product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE industrial (no end caps)

Product ID: CLR130
Unit of Measure
12/EA
Min Order Qty
12
Length
76.2 cm / 30 in
Micron
1 micron
Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 30 inches product photo

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 30 inches

Product ID: CLR2030
Unit of Measure
12/EA
Min Order Qty
12
Length
76.2 cm / 30 in
Micron
20 micron

Claris® Filter Cartridges, Removal Rating 30 μm, Polypropylene, Length 29.25 inches, Nitrile

Product ID: CLR302925M3N
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
30 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
29.25 in
Cartridge Length (Metric)
743 mm
Cartridge Length (Metric)
74.3 cm
Gasket / O-Ring Material
Nitrile
See All Attributes

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :