Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Depth Filter Cartridges
Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Filter Cartridges
Pleated Filter Cartridges

Order Products

Cartridge Length (Imperial)

30 in

Gasket / O-Ring Material

Silicone

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 30 Inches, silicone, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 30 Inches, silicone, DOE industrial

Product ID: PFT0230US
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 30 Inches, silicone, SOE fin end external 222 O-rings

Product ID: PFT0230USM8
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Highly Asymetric Polysulfone
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings, 100 Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Highly Asymetric Polysulfone, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings, 100 Bubble Test

Product ID: PFT0230USM3B
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.2 µm

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings

Product ID: PFT02530USM3712
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings

Product ID: PFT02530USM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial, 100 Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial, 100 Bubble Test

Product ID: PFT04530USB
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm

Discontinued

This part is no longer available. Please contact us for more information.
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings

Product ID: PFT04530USM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial

Product ID: PFT04530US
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings with locking tabs product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 222 O-rings with locking tabs

Product ID: PFT04530USM4
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 30 Inches, silicone, SOE fin end external 226 O-rings

Product ID: PFT04530USM7712
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, DOE industrial

Product ID: PFT0830US
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 30 Inches, silicone, SOE flat closed end external 222 O-rings

Product ID: PFT0830USM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm
128 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English