Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Depth Filter Cartridges
Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Depth Filter Cartridges
Pleated Filter Cartridges
Pleated Filter Cartridges
String-Wound Filter Cartridges
String-Wound Filter Cartridges

Order Products

Gasket / O-Ring Material

Fluorocarbon Elastomer

Profile® II, Filter Cartridges, Polypropylene, Length 30 Inches, Fluorocarbon Elastomer

Product ID: AB3Y40018H
Unit of Measure
24/EA
Min Order Qty
24
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
753 mm
Cartridge Length (Metric)
75.3 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

Duo-Fine® , Filter Cartridges, Removal Rating 3 μm, Length 39 Inches, Fluorocarbon Elastomer, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFN339AV
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
3 µm
Cartridge Length (Imperial)
39 in
Cartridge Length (Metric)
991 mm
Cartridge Length (Metric)
99.1 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes

Nexis® T Filter Cartridges, Removal Rating 5 μm, Polypropylene, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: NXT540NM3V181
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
5 µm
Membrane Material
Polypropylene
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
End Configuration
M3 - SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0)4
Cartridge Type
NXT
See All Attributes

Duo-Fine®, Filter Cartridges, Removal Rating 0.2 μm, Length 40 Inches, FluorocarbonElastomer

Product ID: DFPT0240EVM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
See All Attributes

Duo-Fine®, Filter Cartridges, Removal Rating 3 μm, Length 20 Inches, FluorocarbonElastomer

Product ID: DFPT320EV
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
3 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
Change Out Differential Pressure
2.4 bard
See All Attributes

Nexis® T Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: NXT5010UM3V
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
50 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

Nexis® A Series Filter Cartridges, Removal Rating 90 μm, Polypropylene, Length 20 inches, Fluorocarbon Elastomer

Product ID: NXA9020UM3V
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
90 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
See All Attributes

This product is currently not available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings

Product ID: PFT04520UVM7
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
See All Attributes

Duo-Fine® II, Filter Cartridges, Removal Rating 30 μm, Fluorocarbon Elastomer

Product ID: DFN3021AVM25
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
30 µm
Gasket / O-Ring Material
Fluorocarbon Elastomer
Change Out Differential Pressure
2.4 bard
Cartridge Outer Diameter (OD) (Imperial)
2.6 in
Cartridge Outer Diameter (OD) (Metric)
6.6 cm
Gasket O-Ring Code
V
See All Attributes
Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 inches, Fluorocarbon Elastomer, SOE fin end external 222 O-rings product photo

Nexis® T Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 30 inches, Fluorocarbon Elastomer, SOE fin end external 222 O-rings

Product ID: NXT1030UM8V
Unit of Measure
12/EA
Min Order Qty
12
Micron
10 micron
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT520UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 30 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT530UVM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
See All Attributes
190 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English