Profile® II Depth Filters for CMP Applications

High-Efficiency Depth Filters for CMP Application Filtration

Profile II depth filter cartridges for chemical mechanical processing (CMP) applications effectively remove agglomerated particles and gels from oxide, tungsten and copper slurries without disturbing particle distribution. The steep efficiency curves in these filters result in minimal strip-out of desirable slurry particles while sharply increasing the removal of oversized particles.

Order Products

Industries

Food & Beverage

Availability

In Stock

SUPRApak PW 5200 SW

Product ID: 5302800/S
Unit of Measure
1/EA
Min Order Qty
1
Diameter (Imperial)
7.5 in
Diameter (Metric)
183 mm
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filtration Area (Imperial)
4.3 ft²
Filtration Area (Metric)
0.4 m²
Food Contact Compliant
Yes
See All Attributes

SUPRApak PW Series L Size, 16", PW 5500 Media, 8 m² Filter Area

Product ID: 5302807
Unit of Measure
1/EA
Min Order Qty
1
Flat Gasket Seal
Polypropylene
Food Contact Compliant
Yes
Hot Water Sanitization (Imperial)
185 °F
Steam Sterilization
125 °C
Steam Sterilization (Imperial)
258 °F
Series
PW-Series
See All Attributes

SUPRApak PW 5700 MW

Product ID: 5303071/M
Unit of Measure
1/EA
Min Order Qty
1
Diameter (Imperial)
11.2 in
Diameter (Metric)
285 mm
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filtration Area (Imperial)
29.1 ft²
Filtration Area (Metric)
2.7 m²
Food Contact Compliant
Yes
See All Attributes

SUPRApak PW 7100 MW

Product ID: 5303072/M
Unit of Measure
1/EA
Min Order Qty
1
Diameter (Imperial)
11.2 in
Diameter (Metric)
285 mm
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filtration Area (Imperial)
29.1 ft²
Filtration Area (Metric)
2.7 m²
Food Contact Compliant
Yes
See All Attributes

SUPRApak SW 5900 LW

Product ID: 5302871
Unit of Measure
1/EA
Min Order Qty
1
Core Drainage Discs
Polypropylene
Diameter (Imperial)
16 in
Diameter (Metric)
410 mm
Filter Media
Kieselguhr, Perlite and Cellulose Fibers
Filtration Area (Imperial)
86.1 ft²
Filtration Area (Metric)
8 m²
See All Attributes

SUPRAdisc SD II EKS 200XEKSC440SPW

Product ID: 7007957
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
16 in
Diameter (Metric)
410 mm
See All Attributes

SUPRAdisc SD II 300 200X300C232SPW

Product ID: 7007876
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes

SUPRAdisc SD II 080 200X080C232SPW

Product ID: 7007865
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes

Fluorodyne® II Filter Cartridges, 0.2µm, 20in, Single Open End Code 7, Silicone Elastomer O-ring

Product ID: AB2FSD7WH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0 µm
Membrane Material
Polyvinylidene fluoride (PVDF)
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket O-Ring Code
H4
See All Attributes

KIT VENT TEE, 1" CLAMP, SILICONE

Product ID: ACS0956AU
Unit of Measure
1/EA
Min Order Qty
1

KIT ACS1050EA DN65 DIN 11851 GASKET

Product ID: ACS1050EA
Unit of Measure
1/EA
Min Order Qty
1

INLET/OUTLET ADAPTOR KIT SUPRAPAK L

Product ID: ACS1034GM
Unit of Measure
1/EA
Min Order Qty
1
104 Items

Description

Why choose CMP depth filter cartridges?

These depth filters are available in removal ratings from 0.2 to 40 µm, which are five to 10 times finer than traditional depth filter ratings. They also include a continuously profiled pore structure for built-in prefiltration.

Applications

Microelectronics:

  • Chemical mechanical processing (CMP)

Specifications

*Please refer to the documentation for additional specifications.

 

Removal Ratings

 

  • 0.2 µm, 0.3 µm, 0.5 µm, 1 µm, 3 µm, 5 µm, 10 µm, 20 µm, 30 µm and 40 µm 

 

Pressure Drop vs. Liquid Flow Rate1

 

1 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in centipoise.

Documents

Data Sheets

  • Profile® II Filters for CMP Applications

    Select Language :
    English