Profile® II Depth Filters for CMP Applications

High-Efficiency Depth Filters for CMP Application Filtration

Profile II depth filter cartridges for chemical mechanical processing (CMP) applications effectively remove agglomerated particles and gels from oxide, tungsten and copper slurries without disturbing particle distribution. The steep efficiency curves in these filters result in minimal strip-out of desirable slurry particles while sharply increasing the removal of oversized particles.

Order Products

Industries

Oil & Gas

Product Sub Type

Pleated Filters

Cartridge Length (Imperial)

20 in

Product Type

Filter Cartridges

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, Ethylene Propylene Rubber product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 20 Inches, Ethylene Propylene Rubber

Product ID: PFT320UEW480
Unit of Measure
12/EA
Min Order Qty
12
Micron
3 µm

Duo-Fine® , Filter Cartridges, Removal Rating 0.45 μm, Length 20 Inches, Nitrile, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFN04520UN
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.45 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Nitrile
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial, No Bubble Test

Product ID: PFT520UE
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Duo-Fine®, Filter Cartridges, Removal Rating 3 μm, Length 20 Inches, Nitrile, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFN320AN
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
3 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Nitrile
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, Silicone Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, Silicone Elastomer

Product ID: PFT02520USM7W480
Unit of Measure
12/EA
Min Order Qty
12
Micron
0.25 µm

Ultipor® GF Plus Filter Cartridges, Removal Rating 6 μm, Length 20 inches

Product ID: AB2U6-40Z7H4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
6 µm
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
Cartridge Outer Diameter (OD) (Imperial)
2.75 in
See All Attributes

This product is currently not available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial

Product ID: PFT02520UE
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.25 µm
7 Items
  • 1

Description

Why choose CMP depth filter cartridges?

These depth filters are available in removal ratings from 0.2 to 40 µm, which are five to 10 times finer than traditional depth filter ratings. They also include a continuously profiled pore structure for built-in prefiltration.

Applications

Microelectronics:

  • Chemical mechanical processing (CMP)

Specifications

*Please refer to the documentation for additional specifications.

 

Removal Ratings

 

  • 0.2 µm, 0.3 µm, 0.5 µm, 1 µm, 3 µm, 5 µm, 10 µm, 20 µm, 30 µm and 40 µm 

 

Pressure Drop vs. Liquid Flow Rate1

 

1 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in centipoise.

Documents

Data Sheets

  • Profile® II Filters for CMP Applications

    Select Language :
    English