Profile® II Ink Jet Depth Filter Cartridges

For Pre and Final Filtration of Ink Jet Inks

Profile II Ink Jet depth filter cartridges are constructed from all-polypropylene components with ethylene-propylene O-rings. These absolute-rated depth filter cartridges have excellent compatibility with most ink systems where removal ratings from 0.3 to 10 µm are required. In addition, proven tapered-pore technology and a sanitary dual O-ring seal assure filter integrity and ease of use with a wide range of ink jet formulations.

Order Products

Industries

Industrial Manufacturing

Cartridge Length (Imperial)

10 in

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, silicone, SOE internal O-ring closed end with deep recess

Product ID: PFT02510USM20
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.25 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
See All Attributes

This product is currently not available. Please contact us for more information.

Nexis® A Series Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 inches, EPDM, SOE fin end external 226 O-rings

Product ID: NXA510UM7E
Unit of Measure
60/EA
Min Order Qty
60
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT1010UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end, external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end, external 222 O-rings

Product ID: PFT1010UVM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm

Nexis® A Series Filter Cartridges, Removal Rating 120 μm, Polypropylene, Length 10 inches, DOE industrial (no end caps)

Product ID: NXA12010U
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
120 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
NA
See All Attributes

Poly-Fine® XLD Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches, silicone, DOE industrial

Product ID: XLD1010US
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: PFT0810UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm

Duo-Fine® II, Filter Cartridges, Removal Rating 1 μm, Length 10 Inches

Product ID: DFNT110UN
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
1 µm
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Nitrile
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes

Poly-Fine® II, Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 10 Inches, silicone, SOE fin end external 226 O-rings

Product ID: PFT5010USM7
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
50 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 3 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end external 222 O-rings

Product ID: PFT310UVM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
3 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, silicone, SOE fin end external 226 O-rings, No Bubble Test product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, silicone, SOE fin end external 226 O-rings, No Bubble Test

Product ID: PFT1010USM7
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm
Nexis® A Series Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 inches, DOE Santoprene gasket seal product photo

Nexis® A Series Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 inches, DOE Santoprene gasket seal

Product ID: NXA510UH21
Unit of Measure
30/EA
Min Order Qty
30
Micron
5 micron
418 Items

Description

Why choose Profile II ink jet depth filter cartridges?

A graded pore density means these ink filters provide longer service life and reduce the filtration cost per gallon/liter.

 

Additional benefits include:

 

  • Provide consistent from batch-to-batch ink quality
  • Permanently trap contaminants without affecting critical ink properties
  • Remove oversized contaminants without stripping off colorants
  • Enjoy a longer service life while maintaining low filtration costs

Applications/Use

Microelectronics:

  • Graphic arts ink formulation filtration

Specifications

*Please refer to the documentation for additional specifications.

 

Operating Conditions

 

Operating temperature and maximum differential pressures in compatible fluids.1

 

Operating Temperature Maximum Differential Pressure
82 °C / 180 °F 1 bard / 15 psid
70 °C / 158 °F 2 bard / 30 psid
30 °C / 86 °F2 4.1 bard / 60 psid

 

1 Fluids that do not soften, swell or adversely affect the filter or materials of construction.

2 Recommended filter changeout: 2.3 bard / 40 psi.

 

Typical Liquid Flow Rate versus Differential Pressure3

 

Typical Liquid Flow Rate versus Differential Pressure

3 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in cP.

 

 

Graded Pore Structure

Figure 1 Graded pore structure

Documents

Data Sheets

  • Profile® Star Filter Cartridges for Ink Jet Ink Formulation

    Select Language :
    English