Profile® II Ink Jet Depth Filter Cartridges

For Pre and Final Filtration of Ink Jet Inks

Profile II Ink Jet depth filter cartridges are constructed from all-polypropylene components with ethylene-propylene O-rings. These absolute-rated depth filter cartridges have excellent compatibility with most ink systems where removal ratings from 0.3 to 10 µm are required. In addition, proven tapered-pore technology and a sanitary dual O-ring seal assure filter integrity and ease of use with a wide range of ink jet formulations.

Order Products

Product Sub Type

Pleated Filters

Product Type

Filter Cartridges

Gasket / O-Ring Material

Fluorocarbon Elastomer

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings

Product ID: PFT540UVM7
Unit of Measure
1/EA
Min Order Qty
1
Micron
5 µm

Duo-Fine® II, Filter Cartridges, Removal Rating 10 μm, Length 40 Inches, Fluorocarbon Elastomer

Product ID: DFNT1040UVM18
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
Change Out Differential Pressure
2.4 bard
See All Attributes

This product is currently not available. Please contact us for more information.

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 20 Inches, Fluorocarbon Elastomer, DOE industrial

Product ID: PFT0820UV
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm

Duo-Fine® , Filter Cartridges, Removal Rating 0.2 μm, Length 30 Inches, Fluorocarbon Elastomer, Blank - DOE with elastomer gasket seals & end caps

Product ID: DFNT0230UV
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
0.2 µm
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration
Blank - DOE with elastomer gasket seals & end caps
See All Attributes

Duo-Fine®, Filter Cartridges, Removal Rating 3 μm, Length 40 Inches

Product ID: DFPT340EVM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
3 µm
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings

Product ID: PFT1040UVM7
Unit of Measure
1/EA
Min Order Qty
1
Micron
10 µm

Duo-Fine®, Filter Cartridges, Removal Rating 0.2 μm, Length 30 Inches, FluorocarbonElastomer, SOE flat closed end external 222 O-rings

Product ID: DFPT0230EVM3562
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 40 Inches, Fluorocarbon Elastomer

Product ID: PFT04540UVM8
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 19.5 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.45 μm, Polypropylene, Length 19.5 Inches, Fluorocarbon Elastomer

Product ID: PFT045195UVM3
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.45 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 9.75 Inches, Fluorocarbon Elastomer product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.8 μm, Polypropylene, Length 9.75 Inches, Fluorocarbon Elastomer

Product ID: PFT08975UVM10
Unit of Measure
1/EA
Min Order Qty
1
Micron
0.8 µm

Duo-Fine®, Filter Cartridges, Removal Rating 0.45 μm

Product ID: DFPT0454EVM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.45 µm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
End Configuration
SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0) 3
Change Out Differential Pressure
2.4 bard
Cartridge Outer Diameter (OD) (Imperial)
2.5 in
See All Attributes

Duo-Fine® , Filter Cartridges, Removal Rating 10 μm, Length 30 Inches, Fluorocarbon Elastomer, SOE flat closed end external 222 O-rings

Product ID: DFN1030UVM3
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
Fluorocarbon Elastomer
End Configuration Code
M3
See All Attributes

This product is currently not available. Please contact us for more information.

122 Items

Description

Why choose Profile II ink jet depth filter cartridges?

A graded pore density means these ink filters provide longer service life and reduce the filtration cost per gallon/liter.

 

Additional benefits include:

 

  • Provide consistent from batch-to-batch ink quality
  • Permanently trap contaminants without affecting critical ink properties
  • Remove oversized contaminants without stripping off colorants
  • Enjoy a longer service life while maintaining low filtration costs

Applications/Use

Microelectronics:

  • Graphic arts ink formulation filtration

Specifications

*Please refer to the documentation for additional specifications.

 

Operating Conditions

 

Operating temperature and maximum differential pressures in compatible fluids.1

 

Operating Temperature Maximum Differential Pressure
82 °C / 180 °F 1 bard / 15 psid
70 °C / 158 °F 2 bard / 30 psid
30 °C / 86 °F2 4.1 bard / 60 psid

 

1 Fluids that do not soften, swell or adversely affect the filter or materials of construction.

2 Recommended filter changeout: 2.3 bard / 40 psi.

 

Typical Liquid Flow Rate versus Differential Pressure3

 

Typical Liquid Flow Rate versus Differential Pressure

3 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in cP.

 

 

Graded Pore Structure

Figure 1 Graded pore structure

Documents

Data Sheets

  • Profile® Star Filter Cartridges for Ink Jet Ink Formulation

    Select Language :
    English