Profile® II Ink Jet Depth Filter Cartridges

For Pre and Final Filtration of Ink Jet Inks

Profile II Ink Jet depth filter cartridges are constructed from all-polypropylene components with ethylene-propylene O-rings. These absolute-rated depth filter cartridges have excellent compatibility with most ink systems where removal ratings from 0.3 to 10 µm are required. In addition, proven tapered-pore technology and a sanitary dual O-ring seal assure filter integrity and ease of use with a wide range of ink jet formulations.

Order Products

Cartridge Length (Imperial)

10 in

Filter Media

Polypropylene

Poly-Fine® ARD, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: ARD1010UEM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches

Product ID: ARD1010UH21
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
End Configuration Code
H21
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 Inches, Expanded PTFE gaskets FEP encapsulated silicone O-rings

Product ID: ARD110UTM8
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Expanded PTFE (gaskets) FEP encapsulated silicone (O-rings)
See All Attributes

Poly-Fine® ARD, Filter Cartridges, Removal Rating 40 μm, Polypropylene, Length 10 Inches

Product ID: ARD4010UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
40 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® ARD, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 Inches, EPDM, DOE with elastomer gasket seals and end caps

Product ID: ARD510UEDOE
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes

Discontinued

This part is no longer available. Please contact us for more information.

Poly-Fine® ARD, Filter Cartridges, Removal Rating 5 μm, Polypropylene, Length 10 Inches, silicone

Product ID: ARD510USM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
5 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Silicone
See All Attributes

Claris® Filter Cartridge, CLR1010W480

Product ID: CLR1010W480
Unit of Measure
36/EA
Min Order Qty
36
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket O-Ring Code
Blank
See All Attributes

Claris® Filter Cartridge, 1 µm, 10 in, Single Open End with Fin End, 2 Locking Tabs and External 226 O-rings

Product ID: CLR110M7WS480
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Silicone Elastomer
See All Attributes

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches, silicone, SOE flat closed end external 222 O-rings

Product ID: CLR110M3S
Unit of Measure
30/EA
Min Order Qty
30
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 10 inches

Product ID: CLR110
Unit of Measure
36/EA
Min Order Qty
36
Length
25.4 cm / 10 in
Micron
1 micron
Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 10 inches product photo

Claris® Filter Cartridges, Removal Rating 20 μm, Polypropylene, Length 10 inches

Product ID: CLR2010
Unit of Measure
36/EA
Min Order Qty
36
Length
25.4 cm / 10 in
Micron
20 micron

Claris® Filter Cartridge, 3 µm, 10 in, Double Open Ended with No Endcaps

Product ID: CLR310W480
Unit of Measure
36/EA
Min Order Qty
36
Removal Rating
3 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Change Out Differential Pressure
2.4 bard
See All Attributes
212 Items

Description

Why choose Profile II ink jet depth filter cartridges?

A graded pore density means these ink filters provide longer service life and reduce the filtration cost per gallon/liter.

 

Additional benefits include:

 

  • Provide consistent from batch-to-batch ink quality
  • Permanently trap contaminants without affecting critical ink properties
  • Remove oversized contaminants without stripping off colorants
  • Enjoy a longer service life while maintaining low filtration costs

Applications/Use

Microelectronics:

  • Graphic arts ink formulation filtration

Specifications

*Please refer to the documentation for additional specifications.

 

Operating Conditions

 

Operating temperature and maximum differential pressures in compatible fluids.1

 

Operating Temperature Maximum Differential Pressure
82 °C / 180 °F 1 bard / 15 psid
70 °C / 158 °F 2 bard / 30 psid
30 °C / 86 °F2 4.1 bard / 60 psid

 

1 Fluids that do not soften, swell or adversely affect the filter or materials of construction.

2 Recommended filter changeout: 2.3 bard / 40 psi.

 

Typical Liquid Flow Rate versus Differential Pressure3

 

Typical Liquid Flow Rate versus Differential Pressure

3 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in cP.

 

 

Graded Pore Structure

Figure 1 Graded pore structure

Documents

Data Sheets

  • Profile® Star Filter Cartridges for Ink Jet Ink Formulation

    Select Language :
    English