HDC® II – J Series Pleated Filter Cartridges

Why Choose HDC II J Series filter cartridges?

HDC II J filter cartridges are recommended for removing liquid particles below 5 µm or airborne particles below the 0.1 to 70.0 µm range with a 99.98% removal rating.

 

Additional benefits include:

 

• High dirt retention
• Absolute rated medium
• Has a high capacity for long-life (up to four times)
• Exhibits broad chemical compatibilities

• General Service: Rinse water, reverse osmosis system pre-filtration, water–prior to and/or after demineralization
• General Process Industries: Electroplating solutions, metal etching solutions, audio and videotape coatings, automotive paints, can coatings, coil coatings, computer tape and disc coatings, photographic film manufacturing and processing.
• Chemical/Petrochemical Industries: Amines for gas scrubbing, monomers, polymers, glycols, herbicides and pesticides, liquid catalysts, product polishing, photoresists, acids, bases, solvents and deep well disposal fluids.
• Film and Fiber Industries: Monomers, quench water, slurry additives, delusterants, slip agents, D.I. water, solvents, spin finishes and aqueous salt solutions.
• Power Generation Industries: Makeup water, laundry drain wastewater and steam generator blowdown prefilters.
• Pharmaceutical Industry: Parenterals, ophthalmics and oral medications
• Biological Industry: serum and serum fractions, tissue culture media, vaccine preparations, microbiological growth media, media makeup water and diagnostic sera
• Cosmetics: Toiletries, aftershaves, perfumes, oils, lotions, creams, ointments, shampoos, body rinses and mouthwashes.
• Fermentation Industries: Liquid growth media, makeup water, intermediates, final liquid products, additives, exhaust gas and prefiltration
• Food and Beverage Industries: Potable liquids, wine, beer, soft drinks, flavors, storage tank/reactor vents, corn syrup and edible oils
• Electronic Industries: Photoresists, acids, bases, solvents, etchant gases and D.I. water prefiltration

*Please refer to the documentation for additional specifications

 

The recommended maximum pressure differential for the HDC "J" Series filters is 75 psid up to 140 °F (60 °C) and 45 psid up to 180 °F (82 °C) for UNI CAP filters, and 80 psid up to 122 °F (50 °C) and 60 psid up to 176 °F (80 °C) for AB style filters.

 

Warning: Using these filters for filtration at higher pressures or temperatures than recommended or with fluids incompatible with polypropylene can result in property damage or personal injury and contaminated filtrate.