Features
- Easy installation-allowing simple upgrade of existing housings — the preformed cylindrical silicone jacket is self aligning with the Pall Advanta housing bowl. It can also be used on housings with 100 mm nominal diameter bowls1
- Simple temperature adjustment — control box has a digital input from ambient to 140 °C
- Large LED display of actual temperature — measured by PT100 or Thermocouple
- Separate IP54 rated control box allows full control independent of the housing location
- Low overall installation cost — no expensive steam valves, piping and pressure regulators required
- Easy removal or access for changeout of filter elements
1Please contact Pall for further details.
- Hot water tank vents-elimination of condensate to comply with current GMP
- Freeze dryer vacuum break filters — removal of residual water after steaming or integrity testing
- Filtration of ointment bases-reduction of viscosity or liquidification
- Bulk active ingredient production-temperature control to avoid crystalization during filtration
Materials of Construction
- Jacket Material: Silicone Rubber
- Insulation Material: Silicone Foam
- Housing Material: Polycarbonate
Operating Voltage
- 240 V (50 Hz) or 110 V (60 Hz)
Power Output
- 305 mm (11.8 in.) long = 300 W2 559 mm (22 in.) long = 600 W3
Maximum Temperature De-energized
- 200 °C (392 °F)
Temperature Sensor
- PT100
Thermal Cut-out Temperature Setting
- 150 °C ± 5 °C (302 °F ± 41 °F)
Testing Voltage
- 1500 VΩ
Insulation Value
- Greater than 100 MΩ
Design Standard
- EN 60519-1 and EN 60519-2
Lead Length
- 1 m (3.3 ft)
Recommended Temperature Setting Range
- Ambient to 140 °C (284 °F4)
Maximum Environmental Temperature for Controller
- 55 °C (131 °F)
Maximum Output — Current
- 7A
Over Current Protection @ 23 °C Ambient
- 4 seconds @ 12A 1 seconds @ 24A
Set Temperature Display
- 8 mm (0.31 in.) red LED display
Actual Temperature Display
- 10 mm (0.39 in.) green LED display PID (Proportional Integral Derivative control via Autotune parameters set by the user)
Protection Rating
- IP54
Design Standards
- EN61010-1
2For 10 in. (254 mm) filter elements
3For 20 in. (508 mm) filter elements
4Consult filter element specifications for maximum operating temperatures.
Accessories and Spare Parts
Advanta Trace Heater System for Housings to hold 10 in. (254 mm) Filter Elements | |
ACS0677AM | 240 V (50 Hz), UK Plug |
ACS0678AM | 250 V (50 Hz), European Plug |
ACS0685AM | Extension Lead set (10 m [33 ft]) |
Advanta Trace Heater System for Housings to hold to hold 20 in. (508 mm) Filter Elements | |
ACS0681AM | 240 V (50 Hz), UK Plug |
ACS0682AM | 250 V (50 Hz), European Plug |
ACS0685AM | Extension Lead set (10 m [33 ft]) |
US Parts and Voltages | |
ACS0798AM | 110V ac AB05 160W silicone heating jacket (5 in.) |
ACS0679AM | 110V ac AB1 300W silicone heating jacket (10 in.) |
ACS0683AM | 110V ac AB2 600W silicone heating jacket (20 in.) |
ACS0807AM | 110V ac AB3 800W silicone heating jacket (30 in.) |
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.