Beschreibung
This advanced fluid dynamics design provides enhanced lateral flow across, through and out of the membrane. The unrestricted fluid passage allows the high permeability property of the membrane to be fully utilized.
The result is improved flow rates and extended service life over conventional filter media corrugation and support methods, including those that use more area or variable pleat size combinations.
Features and Benefits
- Excellent flow performance
- Proprietary PTFE nonwoven flow promotion layers
- Excellent chemical and temperature resistance
- High purity PFA hardware
- All fluoro-polymer construction
- 100% integrity tested
- Prewet and acid washed options
1Exclusive of O-ring seals.
Products in this datasheet may be covered by one or more patents, including EP 804,366; US 5,928,516; US 6,174,439; US 6,338,798; US 6,423,226.Spezifikationenn
Materials
- Medium: PTFE
- Hardware: High Purity PFA
- Support and Drainage: PTFE
- O-Ring Options: fluoro-polymer encapsulated fluoroelastomer, Kalrez2
Removal Rating
- 1.0 μm, 0.45 μm, 0.2 μm, 0.1 μm, 0.05 μm
Configurations
- Nominal Length: 102mm / 4 in., 227 mm / 9 in., 254 mm / 10 in., 508 mm / 20 in., 762 mm / 30 in.
- Diameter: 70 mm / 2.75 in.
- O-Ring Size / End Caps: Code 3 (222 double O-ring / flat end), Code 8 (222 double O-ring / extended cap end), Code 6 (226 double O-ring / flat end), Code 7 (226 double O-ring / extended cap end)
Filter Area
- 254 mm / 10 in., 0.84 m2 / 9 ft.2
Operating Conditions
- Maximum Operating Temperature: 185 °C / 365 °F
- Maximum Forward Differential Pressure: 0.69 MPa @ 50 °C / 100 psid @ 122 °F
Integrity Test Values3
- 0.05 μm, 254 mm /10 in. segment at 0.14 MPa (20 psig), 60 cm3 / min
- 0.1 μm, 254 mm /10 in. segment at 0.1 MPa (15 psig), 40 cm3 / min
- 0.2 μm, 254 mm /10in. segment at 0.069 MPa (10 psig), 40 cm3 / min
- 0.45 μm, 254 mm /10in. segment at 0.035 MPa (5 psig), 10 cm3/ min
2Kalrez is a trademarks of DuPont Dow Elastomers.
3Test fluid used is 60/40 IPA: DI H2O.
Leistung
Typical Pressure Drop vs. Liquid Flow Rate4
4For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in centipoise.
Typ
zusätzliche Informationen
Prewetting Procedures
PTFE is a naturally hydrophobic media. If filtering a high surface tension solution, it is necessary to prewet the FLHF cartridge.
Bestellinformation
Example Part Number: FL HF 050 E 04 M6 K PW (See bold references in tables below)
Part Number: FL or HF <Removal Ratings Code from Table 1> < Grade Code from Table 2> <Cartridge Lengths (nominal) Code from Table 3> < End Configurations Code from Table 4> <O-Ring Materials Code from Table 5> <Prewet Code from Table 6>
Code | Description |
FL | Fluoryte Cartridge |
HF | High Flow |
Code | Removal Ratings in Microns (µm) |
050 | 0.05 |
100 | 0.1 |
200 | 0.2 |
450 | 0.45 |
1000 | 1.0 |
Table 2 - Grade
Code | Grade |
Blank | Standard |
E | UHP Grade (Reference Technical Bulletin #1077-T.) |
Code | Cartridge Lengths (nominal) |
04 | 102 mm / 4 in. (standard) |
09 | 227 mm / 9 in. (standard) |
10 | 254 mm / 10 in. (standard) |
20 | 508 mm / 20 in. (standard) |
30 | 762 mm / 30 in. (standard) |
40 | 1016 mm / 40 in. (consult factory) |
Table 4 - End Configurations
Code | End Configurations |
M3 | SOE flat closed end external 222 O-rings |
M6 | SOE flat closed end external 226 O-rings |
M7 | SOE extended cap end external 226 O-rings |
M8 | SOE extended cap end external 222 O-rings |
Code | O-Ring Materials |
F | FEP Encapsulated fluoroelastomer (standard) |
K | Kalrez5 |
C | Chemraz6 |
E | EPDM |
S | Silicone |
V | Fluoroelastomer |
Code7 | Prewet |
PW | 102 mm / 4 in. (standard) |
PW | 227 mm / 9 in. (standard) |
PW | 254 mm / 10 in. (standard) |
PW | 508 mm / 20 in. (standard) |
PW | 762 mm / 30 in. (consult factory) |
5Kalrez is a trademark of DuPont Dow Elastomers.
6Chemraz is a trademark of Greene, Tweed & Co.
7The suffix PW following the part number indicates that the filter is pre-wet and packaged with DI water.
Other O-ring materials are available.
For FLHF Kleen-Change® Assemblies, please see data sheet number A99.
Unit conversion: 1 MPa = 10 bar
Rezensionen
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.