1. Home/
  2. Microelectronics/
  3. Display/
  4. Cleaning/
  5. LCF Kleen-Change® - LCBN
LCF Kleen-Change® - LCBN Produktbild Primary L

LCF Kleen-Change® - LCBN

The LCF Kleen-Change®-LCBN capsule filter is specifically designed to remove gelatinous material and particles from liquid crystal (LC) material, in the manufacture of thin film transistor displays. Its unique configuration and low pressure drop allows for easy venting, thus virtually eliminating the presence of air bubbles, which can cause defects during the liquid crystal one drop filling (ODF) process. Its all fluoro-polymer construction provides for excellent chemical compatibility with low extractables.

Features and Benefits

  • Disposable filter capsule designed with hydraulic buffering capacity minimize defects caused by bubbles during the ODF process
  • Low hold–up volume for reduced LC waste
  • Filter removal rating of 0.1 μm improves yield by retaining gels and fine particles
  • Excellent filter cleanliness
mehr


Kontaktiere uns
* Required

Beschreibung

The LCF Kleen-Change®-LCBN capsule filter is specifically designed to remove gelatinous material and particles from liquid crystal (LC) material, in the manufacture of thin film transistor displays. Its unique configuration and low pressure drop allows for easy venting, thus virtually eliminating the presence of air bubbles, which can cause defects during the liquid crystal one drop filling (ODF) process. Its all fluoro-polymer construction provides for excellent chemical compatibility with low extractables.

Features and Benefits

  • Disposable filter capsule designed with hydraulic buffering capacity minimize defects caused by bubbles during the ODF process
  • Low hold–up volume for reduced LC waste
  • Filter removal rating of 0.1 μm improves yield by retaining gels and fine particles
  • Excellent filter cleanliness

Spezifikationenn

Materials of Construction

Parts Materials
Filter Membrane PTFE
Hardware (capsule and core) PFA
Vent Cap (optional) PFA
End Seal Heat Seal

Removal Ratings 0.1 μm
Maximum Operating
Pressure and Temperature		 0.4 MPa (23 °C)
Connections Inlet/Outlet Vent
1⁄8 in. Swagelok1
compatible		 1⁄8 in. Swagelok
compatible
1 Swagelok is a trademark of Swagelok Company

Leistung

Pressure Drop vs. Liquid Flow Rate (Water, 20°C)

Pressure Drop vs. Liquid Flow Rate (Water, 20°C)

Typ

Filter Capsules

zusätzliche Informationen

Dimensions

nominal

Without Vent

Without Vent

With Vent

With Vent

Bestellinformation

LCBN01FTESW2 [1]

Table 1

Code Vent
Blank None
2 Vent, 1⁄8 in. Swagelok compatible

Rezensionen

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.