Beschreibung
The Micro Kleen-Change filter assembly is designed for small scale dispense applications where low hold-up volume and cleanliness are critical. The low holdup volume is ensured by the very small footprint. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.
- Low hold-up volume
- All fluoro-polymer construction
- No elastomeric seals
- Cleanroom manufactured
Spezifikationenn
Materials
- Medium: PTFE
- Support & Drainage: PFA
- Shell, core, and end caps: PFA440HP
Removal Ratings
- 0.05 μm , 0.1 μm
Filter Area
- 100 cm2 / 15.5 in.2
Connections: Inlet/Outlet, Vent/Drain
- 1⁄8 in. Swagelok1 / 1⁄8 in. Swagelok
Operating Conditions
- Maximum operating pressure:
- 58 psi @ 77 °F / 4 bar @ 25 °C
- 29 psi @ 194 °F / 2.0 bar @ 90 °C
- 20 psi @ 248 °F / 1.5 bar @ 120 °C
- Maximum forward differential pressure: 28 psid @ 68°F / 1.9 bar @ 20°C
Recommended Applications:
- Spin on glass (SOG)
- Hexamethyldisilazane (HMDS)
1 Swagelok is a registered trademark of Swagelok Co.
Leistung
Pressure Drop vs. Liquid Flow Rate*
* For liquids with viscosity differing from 1cP, multiply the pressure drop by the viscosity in centipoise.
Typ
Filter Capsules
zusätzliche Informationen
Dimensions
Bestellinformation
Part Number | Removal | Connection: (In / Out, Vent / Drain) | |
LDFN01F001SW22 | 0.1 | 1⁄8 in. Swagelok, 1⁄8 in. Swagelok | 3.1 / 78 |
LDFN01F0005SW22 | 0.05 | 1⁄8 in. Swagelok, 1⁄8 in. Swagelok | 3.1 / 78 |
Unit conversion: 1 bar = 100 kilopascals
Rezensionen
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.