Profile® UP Filters product photo Primary L

Profile® UP Filters

Profile® UP filters are 63.5 mm (2.5 in.) diameter pleated polypropylene cartridges. The absolute-rated filter medium is constructed using Pall's proprietary method of varying fiber diameter continuously to create a tapered pore filter medium.

Given the unique medium construction and a proprietary crescent-shaped pleat structure, the pressure drop of the Profile UP filters is as low as half that of higher area pleated filters and as low as one-fifteenth that of conventional depth filters. Consequently, Profile UP filters provide exceptional service life. Profile UP filters can best be described as Pall's Ultipleat® filters utilizing Profile depth filter media. As a result, these filters are thicker than conventional pleated filters and are optimized for gel removal and sharp, distinct particle removal. This makes the elements ideal for viscous fluids and dispersions in addition to those many applications where long service life is desired.

For P and W options, the filters are constructed entirely of FDA-listed materials and the absolute rating of the filter is based upon the widely accepted modified Oklahoma State University (OSU) F-2 Filter Performance (Beta Rating) Test.

 
Features Advantages Benefits
Absolute-rated medium
  • Consistent reproducible filtration
  • No media migration
  • No unloading of contaminants
  • Higher product yields
Pleated depth filter medium
  • Excellent gel removal
  • Selective particle removal
  • Long service life
  • Higher product yields
  • Enhanced filtration of dispersions
  • Lower filtration costs
Crescent-shaped medium configuration
  • Pressure drop as low as one-fifteenth that of depth filters, as low as half that of pleated filters with the same removal ratings
  • Optimized filter area
  • Optimized for viscous fluids
  • Faster fill rates
  • Smaller filter assemblies required
  • Lower filtration costs
  • Higher product yields
Polypropylene filter construction
  • Wide chemical compatibility
  • Removal of trace oils
  • Cartridge may be totally incinerated
  • Lower filter inventories
  • Higher product yields
  • Lower waste disposal costs
 


Contact Us
* Required

설명

Profile® UP filters are 63.5 mm (2.5 in.) diameter pleated polypropylene cartridges. The absolute-rated filter medium is constructed using Pall's proprietary method of varying fiber diameter continuously to create a tapered pore filter medium.

Given the unique medium construction and a proprietary crescent-shaped pleat structure, the pressure drop of the Profile UP filters is as low as half that of higher area pleated filters and as low as one-fifteenth that of conventional depth filters. Consequently, Profile UP filters provide exceptional service life. Profile UP filters can best be described as Pall's Ultipleat® filters utilizing Profile depth filter media. As a result, these filters are thicker than conventional pleated filters and are optimized for gel removal and sharp, distinct particle removal. This makes the elements ideal for viscous fluids and dispersions in addition to those many applications where long service life is desired.

For P and W options, the filters are constructed entirely of FDA-listed materials and the absolute rating of the filter is based upon the widely accepted modified Oklahoma State University (OSU) F-2 Filter Performance (Beta Rating) Test.

 
Features Advantages Benefits
Absolute-rated medium
  • Consistent reproducible filtration
  • No media migration
  • No unloading of contaminants
  • Higher product yields
Pleated depth filter medium
  • Excellent gel removal
  • Selective particle removal
  • Long service life
  • Higher product yields
  • Enhanced filtration of dispersions
  • Lower filtration costs
Crescent-shaped medium configuration
  • Pressure drop as low as one-fifteenth that of depth filters, as low as half that of pleated filters with the same removal ratings
  • Optimized filter area
  • Optimized for viscous fluids
  • Faster fill rates
  • Smaller filter assemblies required
  • Lower filtration costs
  • Higher product yields
Polypropylene filter construction
  • Wide chemical compatibility
  • Removal of trace oils
  • Cartridge may be totally incinerated
  • Lower filter inventories
  • Higher product yields
  • Lower waste disposal costs
 

규격사양

Housing Information

Housings are available in either polypropylene, PVC, CPVC, PVDF, carbon steel, or stainless steel and can accommodate 1-356, 10 inch modules per housing (one 40 inch filter represents four 10 inch modules).

성능

Performance Characteristics

 
Cartridge Grade Liquid Service Removal Rating in Microns (μm) at % Efficiency Clean Pressure Drop Aqueous Service MBARD / LPM (PSID / GPM) Per 10 inch Element2
90% 99.98%
020 <1.0 3.2 2.37 / 0.13
045 1.2 4.5 1.55 / 0.085
060 2.5 6.0 0.64 / 0.035
100 4.3 10.0 0.55 / 0.030
200 11.0 20.0 0.46 / 0.025
300 17.0 30.0 0.36 / 0.020
400 19.0 40.0 0.27 / 0.015
500 25.0 50.0 <0.18 / 0.010
700 35.0 1 <0.18 / 0.010
1000 60.0 1 <0.18 / 0.010
 

Operating Characteristics

 
Maximum Differential Pressure3 (BARD / PSID) Temperature (°C / °F)
4.1 / 60 30 / 86
3.4 / 50 50 / 122
2 / 30 70 / 158
1 / 15 80 / 176
 
1 Precision evaluation of the 99.98% removal efficiency for these coarse grades is not possible with the OSU test procedure utilized.

2 Pressure drop in PSI per GPM for a single 10 inch cartridge. For multiple number of elements, divide by the number of cartridges. For fluids other than water, multiply the value calculated by the fluid's viscosity measured in centipoise.

3 Based upon polypropylene core collapse.

종류

Filter Cartridges

주문정보

 
Removal Rating Microns (μm) PUY Series AB Series4 Code 18 AB Series Code 3
2.0 PUY UY020 AB UY02018 AB UY0203
4.5 PUY UY045 AB UY04518 AB UY0453
6.0 PUY UY060 AB UY06018 AB UY0603
10.0 PUY UY100 AB UY10018 AB UY1003
20.0 PUY UY200 AB UY20018 AB UY2003
30.0 PUY UY300 AB UY30018 AB UY3003
40.0 PUY UY400 AB UY40018 AB UY4003
50.0 PUY UY500 AB UY50018 AB UY5003
70.0 PUY UY700 AB UY70018 AB UY7003
100.0 PUY UY1000 AB UY100018 AB UY10003
 

 
Removal Rating Microns (μm) AB Series Code 7 AB Series Code 8 Kleen-Change® 700 Series5,6
2.0 AB UY0207 AB UY0208 LY7 UY020G23
4.5 AB UY0457 AB UY0458 LY7 UY045G23
6.0 AB UY0607 AB UY0608 LY7 UY060G23
10.0 AB UY1007 AB UY1008 LY7 UY100G23
20.0 AB UY2007 AB UY2008 LY7 UY200G23
30.0 AB UY3007 AB UY3008 LY7 UY300G23
40.0 AB UY4007 AB UY4008 LY7 UY400G23
50.0 AB UY5007 AB UY5008 LY7 UY500G23
70.0 AB UY7007 AB UY7008 LY7 UY700G23
100.0 AB UY10007 AB UY10008 LY7 UY1000G23
 
4 Available only as 762 mm (30 inch) or 1016 mm (40 inch) continuous length elements.
5 Kleen-Change 700 series assemblies are only available with 254 mm (10 inch) or 508 mm (20 inch) cartridges.
6 Kleen-Change 100 series assemblies are available.


 
Code Cartridge length mm / in.
1 254 / 10
2 508 / 20
3 762 / 30
4 1016 / 40
 

 
Code O-Ring option
H4 Silicone-standard for Code 3, 7 and 8
H Fluorocarbon elastomer
J Ethylene propylene
H13 Nitrite, standard for Code 18
 

 
Code Gasket option
J Ethylene propylenestandard
H13 Nitrite
H4 Silicone
H Fluorocarbon elastomer
Y1 Polypropylene
 

 
Code Optional configuration
SI Spring attached to filter top
 

Ordering Details

 
Style Description
PUY Series
  • Double open ended
  • Continuous 10, 20, 30, or 40 inch lengths
  • Elastomeric gaskets attached to each end cap
  • Fits housings designed to hold either 2.5 or 2.75 inch outer diameter filters
AB Code 18 Series
  • Single open ended
  • Continuous 10, 20, 30, or 40 inch lengths
  • Single 222 size O-ring
  • Flat top end which will engage the housing lid in the case of back pressure
AB Code 3 Series
  • Single open ended
  • Continuous 10, 20, 30, or 40 inch lengths
  • 222 size O-ring
  • Notched top end to center the filter
AB Code 7 Series
  • Single open ended
  • Continuous 10, 20, 30, or 40 inch lengths
  • 226 size O-ring
  • Finned top end to center filter
  • Locking tabs on cartridge bottom to hold cartridge in place
AB Code 8 Series
  • Single open ended
  • Continuous 10, 20, 30, or 40 inch lengths
  • 222 size O-ring
  • Finned top end to center filter
Kleen-Change 700 Assembly
  • Completely disposable polypropylene capsule
  • Assembly holds either seven 10 inch or 20 inch filters
  • Maximum operating pressure of 5.2 bard (75 psid) at 38 °C (100 °F)
  • Supplied with 1 inch Tri-Clamp* inlet and outlet connections, which are internally threaded with a 34 inch FNPT
 

Notes:
a. The AB Code 18, 3, 7 and 8 elements are recommended if the cartridges be heated and then cooled by 20 °C (68 °F) prior to filtration.
b. The fit-up of AB Code 18 filters must be confirmed to ensure that the top the filter will meet with the housing lid or internal plate in the case of back pressure. This will ensure the cartridge O-ring seal is maintained.
c. The choice of an AB Code 3, 7 or 8 element will depend on the filter housing currently used in retrofit applications.
* Tri-Clamp is a trademark of Ladish Co., Tri-Clover Division.

적용분야

Chem Intermediate Product (Other), Chem Raw Material - Liquid, Amine/Benfield /Other Solvent loop, Chemicals Raw Material / Gas/Air, Poly Cmdty Intermediate (Fluids), Poly Cmdty Raw Material (Fluids), Poly Engrd & Spcl Intermediate (Fluids), Poly Engrd & Spcl Raw Material (Fluids), Chem Final Product (Liquid)

영역

Chemicals, Chemicals, Petro Chem, Chemicals, Polymer, Polymer, Polymer, Polymer, Chemicals

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.