설명
Pleated, High Area Epoxy Filter Cartridges for Long Service Life
- Epoxy Impregnated Cellulosic Media with a Fixed Pore Construction Eliminates Unloading and Media Migration
- Broad Chemical Compatibility
- Recommended for Use with a Wide Range of Fluids and Gases Including Photographic Emulsions and Developer Chemicals, Lube Oil, Printing Inks, Air, Nitrogen, Ammonia, and Natural Gas
- Not Recommended for Food or Pharmaceutical Applications
규격사양
Performance Specifications
Maximum Differential Pressure
Polypropylene Hardware: |
80 psid (5.5 bard) @ 122ºF (50ºC) 45 psid (3.1 bard) @ 180ºF (82ºC) |
Stainless Steel Hardware: | 75 psid (5.2 bard) @ 275ºF (135ºC) |
Product Specifications
Materials of Construction:
Filter Media: | Epoxy Impregnated Cellulose |
Hardware: | Polypropylene or 300 Series Stainless Steel |
Gaskets: | Buna N, fluorocarbon elastomer1 A, Ethylene Propylene |
Dimensions (nominal):
Industrial (1001 style):
Outside Diameter: | 2 3/4" (70 mm) |
Length: | 10" (254 mm) |
Configuration: | DOE with stainless steel hardware |
UNI CAP Style:
Outside Diameter: | 2 1/2" (64 mm) |
Length: |
10" (254 mm), 20" (508 mm), 30" (762 mm), 40" (1020 mm) |
Configuration: | DOE with polypropylene hardware |
Small Flow (4463 style):
Outside Diameter: | 2 1/4" (57 mm) |
Length: | 5 1/4" (133 mm) |
Configuration: | SOE with stainless steel hardware |
Removal Ratings and Flow Specifications
Cartridge Grade | Liquid Service (µm) 98% Efficiency2 | 100% Efficiency3 | Aqueous Clean Pressure Drop4 per 10" PSID per 1 GPM (mbard/lpm) (UNI CAP & 1000 Style) | Gaseous Service (µm) 98% Efficiency | 100% Efficiency |
---|---|---|---|---|---|
EC | 3 | 23 | 0.03 (0.55) | 0.07 | 0.9 |
EE | 10 | 30 | 0.02 (0.36) | 1.5 | 5.0 |
EG | 30 | 49 | 0.01 (0.18) | 11 | 23 |
1 - Registered trademark of DuPont Dow.
2 - Nominal Filtration Rating:
Pall ratings reflect a higher than average 98% removal by weight.
3 - Absolute Filtration Rating:
The diameter of the largest hard spherical particle that will pass through a filter under specified test conditions.
This is an indication of the largest opening in the filter element.
4 - Pressure drop in psi per gpm water for a single 10" (254 mm) module. Multiply this value by the required flow to
determine the total aqueous pressure drop. For fluids other than water, multiply differential pressure by viscosity (cP).
If this calculated pressure drop is excessive, then divide this value by the number of 10" modules required to reduce
this pressure drop to an acceptable level.
stainless steel and can accommodate one to 356 10" modules
per housing. Contact Pall for further details.
The diameter of the largest hard spherical particle that will pass through a filter under specified test conditions.
This is an indication of the largest opening in the filter element.
4 - Pressure drop in psi per gpm water for a single 10" (254 mm) module. Multiply this value by the required flow to
determine the total aqueous pressure drop. For fluids other than water, multiply differential pressure by viscosity (cP).
If this calculated pressure drop is excessive, then divide this value by the number of 10" modules required to reduce
this pressure drop to an acceptable level.
Housing Information
Housings are available in polypropylene, carbon steel, orstainless steel and can accommodate one to 356 10" modules
per housing. Contact Pall for further details.
종류
Filter Cartridges
주문정보
Part Numbers/Ordering Information
Element Part Number
UNI CAP Style: PUY
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_triangle_down.gif)
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_triangle.gif)
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_square.gif)
Industrial 1001 Style: MCS 1001
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_triangle.gif)
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_square.gif)
Small Flow 4463 Style: MCS 4463 EC
![](/INTERSHOP/static/WFS/PALL-PALLUS-Site/-/PALL/en_US/images/Fuels-and-Chemicals/ds_sym_lb_square.gif)
Code![]() | Cartridge Lengths (nominal) |
---|---|
1 | 10" |
2 | 20" |
3 | 30" |
4 | 40" |
Code![]() | Cartridge Grade |
---|---|
EC | EC |
EE | EE |
EG | EG |
Code![]() | Gasket Option |
---|---|
H13 | Buna N (Standard for 1001 Style) |
H | fluorocarbon elastomer A |
J | Ethylene Propylene (Standard for UNI CAP Style) |
적용분야
Petrochem quench water, Poly Cmdty Intermediate (Fluids), Poly Cmdty Raw Material (Fluids), Poly Engrd & Spcl Intermediate (Fluids), Poly Engrd & Spcl Raw Material (Fluids)
영역
Petro Chem, Polymer, Polymer, Polymer, Polymer
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.