Single Metal Element Filter Housing product photo Primary L

Single Metal Element Filter Housing

  • Single element housing designed to accommodate 25.4 cm (10 in), 50.8 cm (20 in), and 88.9 cm (35 in) length elements. Other sizes are available upon request.
  • Housings are constructed of 316L stainless steel for strength and corrosion resistance
  • Designed for use with Pall's Ultipleat® Polymer candles and fan pleat polymer candles
  • Straight through assembly – fluid flow enters and exits in a straight line
  • Quick connect/disconnect for easy installation and removal of metal filter housing
  • Includes vent fitting and ports for pressure & temperature (P&T) measurements
  • Reliable metal-to-metal sealing

Benefits

  • Revolutionary Ultipleat geometry packs a high filter area per single element housing
  • Smaller and more economical than most standard screen changer equipment
  • Low operational costs
  • Low capital costs


Contact Us
* Required

설명

  • Single element housing designed to accommodate 25.4 cm (10 in), 50.8 cm (20 in), and 88.9 cm (35 in) length elements. Other sizes are available upon request.
  • Housings are constructed of 316L stainless steel for strength and corrosion resistance
  • Designed for use with Pall's Ultipleat® Polymer candles and fan pleat polymer candles
  • Straight through assembly – fluid flow enters and exits in a straight line
  • Quick connect/disconnect for easy installation and removal of metal filter housing
  • Includes vent fitting and ports for pressure & temperature (P&T) measurements
  • Reliable metal-to-metal sealing

Benefits

  • Revolutionary Ultipleat geometry packs a high filter area per single element housing
  • Smaller and more economical than most standard screen changer equipment
  • Low operational costs
  • Low capital costs

응용분야

  • Pilot lines
  • Polymer recycling lines
  • Filtering of medical grade plastics
  • Specialty polymers and pigments

규격사양

Housing Specifications

Maximum operating pressure1

  • 343.6 bar (5000 psig) @ 330 °C (626 °F)

Materials of Construction

  • Housing: 316L stainless steel
  • O-ring: 321 stainless steel
  • Bolting: Alloy steel
  • Code: ASME, no stamp
  • Insulation: Customer furnished
  • Heating: Customer furnished
  • Surface finish: 63Rms for all process wetted surfaces

Connections

  • Inlet/outlet: 1 in. – 3 in. Securamax2 with mating hubs and seals
  • Vent: 12 in. threaded bleed fitting
  • Drain: Customer furnished
1 Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on the filter element used. For questions concerning compatibility, contact Pall.
2 Securamax, the pipe connector and flow control products company, re-launched around the world as SMX International.

Housing Dimensional Data (nominal)

 
Ordering Part # Dimensions (cm / in.) Housing Filter Area (m2 / ft2) 3 Estimated Housing Weight (kg / lbs)
A B C D E
110_FP 5.72 / 2.25 19.69 / 7.75 42.67 / 16.80 12.07 / 4.75 5.08 / 2.00 0.05 / 0.49 26.31 / 58
110_UP 5.72 / 2.25 19.69 / 7.75 42.67 / 16.80 12.07 / 4.75 5.08 / 2.00 0.08 / 0.89 26.31 / 58
120_FP 5.72 / 2.25 41.91 / 16.50 64.90 / 25.55 12.07 / 4.75 5.08 / 2.00 0.10 / 1.12 45.36 / 100
120_UP 5.72 / 2.25 41.91 / 16.50 64.90 / 25.55 12.07 / 4.75 5.08 / 2.00 0.19 / 2.05 45.36 / 100
135_FP 7.19 / 2.83 78.74 / 31.00 102.74/ 40.45 14.86 / 5.85 6.10 / 2.40 0.31 / 3.37 115.67 / 255
135_UP 7.19 / 2.83 78.74 / 31.00 102.74/ 40.45 14.86 / 5.85 6.10 / 2.40 0.54 / 5.78 115.67 / 255
140_FP 7.19 / 2.83 41.43 / 16.31 65.43 / 25.76 14.86 / 5.85 6.10 / 2.40 0.16 / 1.72 69.40 / 153
140_UP 7.19 / 2.83 41.43 / 16.31 65.43 / 25.76 14.86 / 5.85 6.10 / 2.40 0.27 / 2.92 69.40 / 153
 
3 The filter area is based on Pall's Dynalloy® 1407 media, 20 μm, 127.6 bard (1850 psid) cartridge. The actual filter area will vary depending on the micron rating and pressure rating of the element used.

Housing Drawing

Housing Drawing

Element Specifications

Pall's proprietary Ultipleat Polymer candles and standard fan pleat metal candles are designed for use in the Single Metal Element Filter Housings. The high surface area of the Ultipleat Polymer candles coupled with the uniform flow distribution produces a significant increase in the filter medium's effective dirt-holding capacity. The end result is an extended on-stream life and improved melt quality. Manufactured from 300 series stainless steel, Pall metal candles are designed to be corrosion-resistant and are cleanable, with the ability to withstand numerous cleaning cycles.

 
  Fan pleat polymer candle Ultipleat Polymer candle
Media 316 SS 316 SS
Hardware
(except adapter)
316 SS 316 SS
Adapter 316 SS UNS S21800
 

Housing Drawing

 
  Fan pleat polymer candle Ultipleat Polymer candle
Dynalloy4 media 3 μm – 80 μm 7 μm – 80 μm
Dynamesh5 media 5 μm – 230 μm 7 μm – 430 μm
 
4 Dynalloy media is Pall's sintered random fiber depth style media.
5 Dynamesh media is Pall's wiremesh style media.
Note: Contact Pall for additional types of media, micron ranges and materials of construction.


Element Dimensional Data (nominal)

 
Model Filter Element P/N# Type of Pleat Element
OD (cm /in.)
A
Element Exposed
Length (cm / in.)
B
External Thread
Size
C
Element Thread
Engagement
D
110_FP D116205-2001407 Fan
Pleat
candle
3.51 / 1.38 19.69 / 7.75 0.750-16 UNF 0.375˝
120_FP D116150-1001407 3.51 / 1.38 41.43 / 16.31 0.750-16 UNF 0.375˝
135_FP 119353-03-1407 4.45 / 1.75 78.74 / 31 1.250-12 UNF 0.4˝
140_FP 119353-02-1407 4.45 / 1.75 41.43 / 16.31 1.250-12 UNF 0.4˝
             
110_UP D360197AAB-1407 Ultipleat
candle
3.61 / 1.42 19.69 / 7.75 0.750-16 UNF 0.375˝
120_UP D360414AAB-1407 3.61 / 1.42 19.69 / 7.75 0.750-16 UNF 0.375˝
135_UP D460787AAA-1407 4.60 / 1.81 78.74 / 31 1.250-12 UNF 0.4˝
140_UP D460414AAA-1407 4.60 / 1.81 41.43 / 16.31 1.250-12 UNF 0.4˝
 

Element Drawing



종류

Housings, Vessels, or Assemblies

적용분야

Poly Cmdty Final Product (Melt), Poly Engrd & Spcl Final Product (Melt)

영역

Polymer, Polymer

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.