Features

• Optional Differential Pressure Devices
• Gray Cast Iron Head
• Painted External Finish
• Drawn Steel Bowl
• High Strength Fatigue Rated Housing
• Full Flow Fast Response Bypass Valve
• O-Ring Seals
• Ultipor® III Element
• Optional Drain Port (Not Shown)

Maximum Acceptable Working Pressure:

600 psi (41 bar)

Fatigue Pressure Rating:

600 psi (41 bar)
(2,000,000 cycles to 600 psi)

Typical Burst Pressure:

2400 psi (165 bar)

Temperature Range:

Nitrile seals -45°F to 225°F (-43°C to 107°C)
Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids

Dry Weights:

R length– 9 lbs. (4.1 kg)
S length– 10 lbs. (4.6 kg)
T length– 11 lbs. (5 kg)

Filter Element Collapse Pressure:

9100–290 psid (20 bar)

Dimensional Drawings

 

Element Pressure Drop Factor

Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.

9100 Series Element P factor (psid/gpm)
Length	KZ	KP	KN	KS	KT
4"	1.01	0.44	0.36	0.27	0.19
8"	0.53	0.25	0.21	0.16	0.11
13"	0.32	0.14	0.11	0.09	0.06

Housings, Vessels, or Assemblies

Assembly P/N:	H		8110
		Table1		Table2	Table3	Table4	Table5	Table6	Table7	Table8

Element P/N:	HC	9100 F
			Table4	Table5	Table1

Note: Choose from the options in the following tables to compile the specific Product Number.

TABLE 1: SEAL OPTIONS
Code	Seals
H	Nitrile
Z	Fluorocarbon

 

TABLE 2: PORT STYLE OPTIONS
Code	Port Style
A	SAE J514 straight thread

 

TABLE 3: PORT SIZE OPTIONS
Code	Size
12	3/4"
16	1"

 

TABLE 4: FILTER ELEMENT OPTIONS
Code	ßx  200	ßx(c)=1000
KZ	<1	2.5
KP	3	5
KN	6	7
KS	12	12
KT	25	22

 

TABLE 5: LENGTH OPTIONS*
Assembly Code	Element Code**
R	4
S	8
T	13
* Use code in second column for element part no. ** Nominal length in inches.

TABLE 6: BYPASS VALVE OPTIONS
Code	Description
A	25 psid ± 5
B	50 psid ± 5

 

TABLE 7: DIFFERENTIAL PRESSURE DEVICE OPTIONS
Code	Description
P	Visual indicator with thermal lockout
D	Visual indicator with no thermal lockout
L	Electrical switch (SPDT) with 6" leads
T	Electrical switch with DIN connector
M	'T' type switch with matching wiring cap
S	Electrical switch with MS receptacle
V	Combined visual/electrical with DIN connector
B	Plug in place of indicator

 

TABLE 8: OPTIONAL DRAIN PORTS
Code	Description
Omit	No drain
6	1/4" SAE drain port and plug

 

Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling, Non Contact, Quenching / Cleaning, Roll Bite (Safety Filter), Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening

Automotive, Mobile OEM, Primary Metals, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, Mining, Mining, Mining, Mining, Mining, Mining, Mining, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper