설명
Flows to 65 gpm (250 L/min)
Pressures to 6000 psi (400 bar)
Port sizes: 1-1/4"
Please Note:
The 9685 series filter assemblies are no longer available and are being replaced with Ultipleat® UH319 Filter Assemblies
All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.
Pressures to 6000 psi (400 bar)
Port sizes: 1-1/4"
The 9685 series filter assemblies are no longer available and are being replaced with Ultipleat® UH319 Filter Assemblies
All replacement filter elements, differential pressure indicators and sealkits remain available for this series. See 'Ordering Information' tab above for details of spares.
규격사양
Features
- Ductile Iron Head
- Commuter Valve (To Repressurize After Element Change)
- Bleed Valve
- O-Ring Seals
- Ultipor® III Element
- Drain Port and Plug
- Optional Differential Pressure Device
- Stainless Steel Bypass Valve with Nylon Poppet (Not Shown)
- Stainless Steel Ball Valve with PTFE Seats (Not Shown)
- Change Over Handle with Latching Pin Mechanism
- All Non-Stainless Steel Parts Corrosion Protected
Maximum Acceptable Working Pressure:
6000 psi (400 bar)Fatigue Pressure Rating:
4000 psi (275 bar)Typical Burst Pressure:
24,360 psi (1680 bar)Temperature Range:
Nitrile seals -45°F to 225°F (-43°C to 107°C)Fluorocarbon seals -20°F to 250°F (-29°C to 120°C)
140°F (60°C) maximum in HWCF or water-glycol fluids
Dry Weights:
S length– 45 lbs. (21 kg)T length– 50 lbs. (23 kg)
U length– 55 lbs. (25 kg)
Filter Element Collapse Pressure:
9600– 290 psid (20 bar)Dimensional Drawings
성능
Figure 1. Housing Pressure Drop using fluid with 0.9 S.G. Housing Pressure drop is directly proportional to specific gravity. |
|
Figure 2. Bypass Valve Pressure Drop using fluid with 0.9 S.G. Bypass valve pressure drops are directly proportional to specific gravity. |
|
Element Pressure Drop Factor
Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.
9600 Series Element P factor (psid/gpm) | |||||
Length | KZ | KP | KN | KS | KT |
---|---|---|---|---|---|
8" | 0.46 | 0.20 | 0.17 | 0.12 | 0.09 |
13" | 0.27 | 0.12 | 0.10 | 0.07 | 0.05 |
16" | 0.20 | 0.09 | 0.07 | 0.05 | 0.04 |
종류
Housings, Vessels, or Assemblies
주문정보
Assembly P/N: | H | 9685 |
| |||||||
|
| Table1 |
| Table2 | Table3 | Table4 | Table5 | Table6 | Table7 |
Element P/N: | HC 9600 | F |
|
|
|
| |||
|
| Table4 | Table5 | Table1 |
|
|
|
Note: Choose from the options in the following tables to compile the specific Product Number.
TABLE 1: SEAL OPTIONS | |
Code | Seals |
---|---|
H | Nitrile |
Z | Fluorocarbon |
TABLE 2: PORT STYLE OPTIONS Code Port Style A SAE J514 straight thread D Flange SAE J518c-Code 61E
Flange SAE J518c-Code 62
TABLE 3: PORT SIZE OPTIONS | ||
Code | Size | Style Availability |
---|---|---|
20 | 1-1/4" | All |
TABLE 4: FILTER ELEMENT OPTIONS | ||
Code | ßx 200 | ßx(c)=1000 |
---|---|---|
KZ | <1 | 2.5 |
KP | 3 | 5 |
KN | 6 | 7 |
KS | 12 | 12 |
KT | 25 | 22 |
TABLE 5: LENGTH OPTIONS* Assembly Code Element Code** S 8 T 13U
16* Use code in second column for element part no.
** Nominal length in inches.
TABLE 6: BYPASS VALVE OPTIONS Code Description L 58 psid
TABLE 7: Differential Pressure Device Options Code Description P Visual indicator with thermal lockout D Visual indicator with no thermal lockoutL
Electrical switch (SPDT) with 6" leadsT
Electrical switch with DIN connectorM
'T' type switch with matching wiring capS
Electrical switch with MS receptacleV
Combined visual/electrical with DIN connectorB
Bleed plug and seal in place of indicatorAll differential pressure devices for the 9685 set at 44 psid.
적용분야
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Coolants / Bearing Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Drives Gear Box + Roll Housing, Forging / Extrusion, Forging / Extrusion, Gear Box / Bearing, Gear Box / Bearing, Gear Box / Morgoil, Gear Box / Morgoil, Material Directional Control, Material Directional Control, Material Handling, Material Handling, Non Contact, Non Contact, Quenching / Cleaning, Quenching / Cleaning, Roll Bite (Safety Filter), Roll Bite (Safety Filter), Shape + Material Handling, Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening
영역
Automotive, Mobile OEM, Primary Metals, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, Mining, Mining, Mining, Mining, Mining, Mining, Mining, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Primary Metals, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.