설명
Features
- Multi-cartridge housing accepts 3-7 AB-style, Single Open End, Double Open End, RF, and 1001-style filters, depending upon model selected
- Accepts 10 in. (254 mm), 20 in. (508 mm), 30 in. (762 mm), or 40 in. (1016 mm) Pall Code 3, Code 7, Code 8, Code 18, 1001, DOE, or RF filter cartridges
- All wetted parts are 316 stainless steel
- Offset T connections for easy installation
- Quick-opening swing bolt closure facilitates filter change-out
- Wide choice of inlet/outlet sizes and O-ring seal materials
- Options for passivation and cleaning for oxygen service
For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)
응용분야
- DI water
- Steam
- Compressed gases
- Prefilters to fermenter feed
- Chemical intermediates
규격사양
Housing Specifications
Maximum allowable working pressure
195 psig (13.44 bar) @ 375 °F (190.6 °C)210 psig (14.48 bar) @ 300 °F (148.9 °C)
230 psig (15.86 bar) @ 200 °F (93.3 °C)
260 psig (17.93 bar) @100 °F (37.8 °C)
Note: Above ratings apply to housing only. Cartridge and housing O-ring selection may impose different and narrower limitations.
Materials of construction
Head and Body: | 316/316L Stainless Steel |
Code: | ASME Code, Section VIII, Division I U stamp |
Connections:
Inlet/outlet: | 2-3" NPT, 2-4" 150lb. ANSI raised face flange |
Vent/drain: | 1⁄2" NPT vent; 1" NPT drain |
Gauge ports: | 1⁄4" NPT |
Shell o-rings:1 | Fluorocarbon, FEP encapsulated fluorocarbon, silicone, nitrile, ethylene propylene, ethylene propylene for steam service |
1 In compliance with FDA21CFR177.2600 regulations.
Dimensional Data
Model | Flow Rate2 (gpm/lpm) | Dimensions A (in./mm) Max. | Volume (ft3/m3) | Weight (empty) (lbs/kg) | Weight Full (water) (lbs/kg) |
IMLA131 | 10/37.9 | 37/939.8 | 0.7532/0.0213 | 137/62.14 | 184/83.46 |
IMLA132 | 20/76 | 47/1193.8 | 1.0577/0.03 | 146/66.22 | 212/96.16 |
IMLA133 | 30/114 | 58/1473.2 | 1.3622/0.0386 | 155/70.31 | 240/108.86 |
IMLA134 | 40/151 | 68/1727.2 | 1.6667/0.0472 | 166/75.30 | 270/122.47 |
IMLAD31 | 10/37.9 | 37/939.8 | 0.7532/0.0213 | 137/62.14 | 184/83.46 |
IMLAD32 | 20/76 | 47/1193.8 | 1.0577/0.03 | 146/66.22 | 212/96.16 |
IMLAD33 | 30/114 | 58/1473.2 | 1.3622/0.0386 | 155/70.31 | 240/108.86 |
IMLAD34 | 40/151 | 68/1727.2 | 1.6667/0.0472 | 166/75.30 | 270/122.47 |
IMLA731 | 10/37.9 | 37/939.8 | 0.7532/0.0213 | 137/62.14 | 184/83.46 |
IMLA732 | 20/76 | 47/1193.8 | 1.0577/0.03 | 146/66.22 | 212/96.16 |
IMLA733 | 30/114 | 58/1473.2 | 1.3622/0.0386 | 155/70.31 | 240/108.86 |
IMLA734 | 40/151 | 68/1727.2 | 1.6667/0.0472 | 166/75.30 | 270/122.47 |
IMLA831 | 10/37.9 | 37/939.8 | 0.7532/0.0213 | 137/62.14 | 184/83.46 |
IMLA832 | 20/76 | 47/1193.8 | 1.0577/0.03 | 146/66.22 | 212/96.16 |
IMLA833 | 30/114 | 58/1473.2 | 1.3622/0.0386 | 155/70.31 | 240/108.86 |
IMLA834 | 40/151 | 68/1727.2 | 1.6667/0.0472 | 166/75.30 | 270/122.47 |
IMLAT31 | 10/37.9 | 37/939.8 | 0.7532/0.0213 | 137/62.14 | 184/83.46 |
IMLAT32 | 20/76 | 47/1193.8 | 1.0577/0.03 | 146/66.22 | 212/96.16 |
IMLAT33 | 30/114 | 58/1473.2 | 1.3622/0.0386 | 155/70.31 | 240/108.86 |
IMLAT34 | 40/151 | 68/1727.2 | 1.6667/0.0472 | 166/75.30 | 270/122.47 |
2 Suggested rate of flow for water. Rate varies dependent upon cartridge inlet/outlet selection.
Dimensional Drawings
종류
Housings, Vessels, or Assemblies
주문정보
IM [1] [2] [3] [4] [5] GN [6] [7] [8]
(e.g., IMLA 833 GN 32C2H)
(e.g., IMLA 833 GN 32C2H)
Table 1
Code | Material of construction |
L | 316/316L Stainless Steel |
Table 2
Code | Design |
A | ASME "U" Stamp |
Table 3
Code | Filter element style | Max # around |
1 | 1001 | 5 |
D | DOE / RF | 7 |
7 | Code 7 | 5 |
8 | Code 3, 8, 18 | 5-AB Style, 23⁄4" O.D. 7-M Style, 21⁄2" O.D. |
T | Spring / Guide | 7 |
Table 4
Code | # Around |
3 | 3 Elements |
4 | 4 Elements |
5 | 5 Elements |
6 | 6 Elements |
7 | 7 Elements |
Table 5
Code | Size | "A" | "C" | Weight | |
Empty (lbs/kg) | Full (water) (lbs/kg) | ||||
1 | 10? | 37" | 10" | 137/62.14 | 184/83.46 |
2 | 20? | 47" | 20" | 146/66.22 | 212/96.16 |
3 | 30? | 58" | 30" | 155/70.31 | 240/108.86 |
4 | 40? | 68" | 40" | 166/75.30 | 270/122.47 |
Table 6
Code | Inlet/outlet |
32 | 2" NPT |
33 | 2" Flange |
48 | 3" NPT |
49 | 3" Flange |
65 | 4" Flange |
Table 7
Code | Housing options |
None | None |
C2 | Passivated |
C9 | Cleaned for oxygen service3 |
3 Must use Code H or H1 O-Ring type.
Table 8
Code | O-ring type |
H | Fluorocarbon elastomer |
H1 | FEP encapsulated fluorocarbon elastomer |
H4 | Silicone |
H13 | Nitrile |
J | Ethylene propylene |
J7 | Ethylene propylene for steam service |
적용분야
Auto Original Paint, Auto Paint Process Water, Auto Painting/Coating Sludge Separation, Auto Painting/Coating Zinc Phosphate Bath, Auto Power Train Dept: Parts Washing, Test Stands (Metal Chip Filtration), Mining Final Product (Slurry), Municiple Mining Water [Rinsing], Quenching / Cleaning, Roll Bite (Safety Filter), Shape + Material Handling, Pulp & Paper Bleach Chemical Prep, Pulp & Paper LOH, Pulp & Paper Machine Process Application, Pulp & Paper Paper Coating, Pulp & Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.