설명
The 1 ®m Ultipleat® High Flow Element is a large diameter, coreless, single open ended, pleated PES filter element cartridge with an inside to outside flow pattern. The filter®s unique, crescent-shaped pleat geometry, combined with its large 6.3 inch (16 cm) diameter allows you to use fewer filters to remove fine particles and cysts in high flow applications.
Benefits
Benefits
- High flow rates per element
- Low cost of installation and filtration
- Fewer elements per change out
- 1 ®m absolute* filtration
- Polyethersulfone media provides greater than 3 log reduction®of Giardia oocysts and Cryptosporidium
- Inside to outside flow configuration retains all particulate matter inside the element
- Coreless, all plastic construction to minimize waste disposal
- U-cup element seal ensures high level removal efficiencies
* Particle Removal Rating
Crescent-Shaped Pleat Geometry
응용분야
®
- Barrier to cysts and oocysts
- Prefilter for bottled water sterilizing filters
- Food and beverage processes
규격사양
Performance Specifications
Water flow rate
20" length ® 68 gpm/psid (257 lpm/70 mbar)
40" length ® 135 gpm/psid (511 lpm/70 mbar)
60" length ® 204 gpm/psid (772 lpm/70 mbar)
Maximum forward differential pressure
50 psid @ 180®F (3.44 bar @ 82®C)
Maximum operating temperature
180®F (82®C)
Sanitization ®
Water flow rate
20" length ® 68 gpm/psid (257 lpm/70 mbar)
40" length ® 135 gpm/psid (511 lpm/70 mbar)
60" length ® 204 gpm/psid (772 lpm/70 mbar)
Maximum forward differential pressure
50 psid @ 180®F (3.44 bar @ 82®C)
Maximum operating temperature
180®F (82®C)
Sanitization ®
- Can be sanitized with hot water (185®-194®F/85®-90®C) for a maximum of 100 cycles®(1 cycle = 10 minutes) without compromising the removal efficiency of the filter.
- Peracetic acid, chlorinated alkaline products and other sanitization chemicals may be used.®Contact Pall for recommended procedures.
Product Specifications
®®®®®®®®® ®®®
Materials of Construction
| Filter Media:® | ®1 ®m polyethersulfone |
| Outer Sleeve and End Caps:® | ®Polypropylene |
| Drainage and Wrap:® | ®Polypropylene |
| Wrap Adhesive: | ®Polyolefin hot melt |
| Filter Seal: | ®FDA compliant ethylene propylene |
Dimensions
| Diameter: | 6.3" (16 cm)® |
| Length: | 20", 40", 60"®(51 cm, 102 cm, 152 cm) |
Other Ultipleat High Flow Elements
Ultipleat High Flow elements are available in other filter®media with absolute ratings of 2, 4.5, 10, 20, 40 and 100 ®m. Contact Pall for more information.
Housing Design
A single element, sanitary designed housing is available for use with the 1 ®m Ultipleat High Flow element.® Industrial style housings are also available. Contact Pall for more information.
®
®
성능
1 ®m Ultipleat High Flow
종류
Large Format Filters
주문정보
Product Part Number:® HFU6 
®CAS010JUW
®CAS010JUW
|
Code | Length |
|---|---|
| 20 | 20" (51 cm) |
| 40 | 40" (102 cm) |
| 60 | 60" (152 cm) |
적용분야
Auto Painting/Coating Sludge Separation, Auto Painting/Coating Zinc Phosphate Bath, Auto Power Train Dept: Parts Washing, Test Stands (Metal Chip Filtration), Quenching / Cleaning, Pulp & Paper Bleach Chemical Prep, Pulp & Paper Machine Process Application, Pulp & Paper Paper Coating, Pulp & Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
