설명
The Ultipleat HP filter is specifically designed for use in recirculating nickel plating baths to provide rapid bath clean-up. It is also ideally suited for use in recirculated cleaning baths of DI water and alkaline soaps.
Features and Benefits
- Membrane wets out spontaneously in Ni plating and DI water + soap mixtures
- Removal rating of 0.1 µm in recirculation mode; 0.2 µm in single pass
- Very high flow rates
- Exceptionally low differential pressure
- Low extractables
- 100% integrity tested
- Serialized for traceability
- Manufactured in cleanroom environment
규격사양
Materials
- Medium: Hydrophilic, highly asymmetric polysulfone
- Core, Cage, End Caps: Polypropylene
- Support and Drainage: Polypropylene
- O-Ring: fluoro-polymer encapsulated fluoroelastomer
Removal Ratings
- 0.1 μm in recirculation mode; 0.2 μm in single pass
Filter Area
- AB2 style: 1.64 m2 / 17.6 ft.2
Configurations
- Nominal Length: AB2: 508 mm / 20 in.
- Diameter: 70 mm / 2.75 in.
- O-Ring Size/End Caps: Code 3 (222 double O-ring / flat end)
Operating Conditions
- Maximum Operating Temperature: 90 °C / 194 °F
- Maximum Forward Differential Pressure: 0.2 MPa @ 90 °C / 30 psid @ 194 °F
성능
Pressure Drop vs. Liquid Flow Rate1
1For liquids with viscosity differing from water, multiply the pressure by the viscosity in centipoise.
종류
Filter Cartridges
주문정보
| Part Number | Removal Rating (μm) | Nominal Length (mm / in.) | Configuration Code | O-Ring Material |
| AB2UHPA3EH1 | 0.1 μm in recirculation mode 0.2 μm in single pass mode | 508 / 20 | 3 | Teflon encapsulated fluoroelastomer |
적용분야
Chemicals, Plating
영역
Semiconductor, Data Storage
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
