The Pall XpressKleen JKC disposable assembly uses a new generation of surface modified and patent pending PTFE membrane designed for leading edge critical chemical processes.
The XpressKleen JKC filter provides control of critical size particles and maintains critical fluid purity with a product guarantee of less than 3 ppb of total metal ion extractables1. The XpressKleen filter's surface cleanliness includes removal of organic contamination and surface particles. This makes the filter suitable for use in point of use (POU) and at the point of process (POP) to help fabs define a contamination control system that delivers the required fluid purity to the wafer.
This is accomplished by Pall's completely integrated and advanced manufacturing capability that extends from the PTFE resin to the finished filter device. The filter cleanliness reduces process downtime and delivers fast qualification following filter change.
The XpressKleen JKC ( Junior Kleen-Change® ) assembly is a completely disposable filter unit designed for critical single pass use.
- Low extractables1,2 ‹3 ppb total of 13 elements, ‹0.1ppb(Ni), ‹0.2ppb(Cu)
- 40nm particle rinse up control in UPW
- TOC control
- 100% prewetted shipment with ultrapure water package
- Small size designed KC assembly for critical singlepass and POU retention
- Disposable filter unit with filter cartridge integrally sealed in housing
- Sealed assembly for safer handling and faster change-out
- 100% integrity tested
1 Total metal concentrations in 13 elements: Li, Na, Mg, Al, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Pb. Consult factory
2 XP10 nm has ≤1ppb of total metal ion concentration per single length filter.
Materials of Construction3
|Filter Medium||Surface modified PTFE|
|Core / Outer Cage||PFA|
3 All fluoro-polymer materials made without PFOA.
Removal Ratings and Operating Conditions
|Removal Ratings||10 nm||12 nm||15nm||30nm|
|Nominal Filter Area||1300 cm2 / 1.4 ft2|
|Maximum Operating Temperature||120 °C / 248 °F|
|Maximum Operating Pressure||0.50 MPaG ‹ 40 °C / 73 psig ‹ 144 °F
0.20 MPaG ‹ 90 °C / 28 psig ‹ 194 °F
0.15 MPaG ‹ 120 °C / 21 psig ‹ 248 °F
Typical Flow Characteristics - 1cP fluid, 20℃
Part Numbers / Ordering Information4
LDFN03XP   E 
|Code||Inlet / Outlet||Vent / Drain|
|06 5||⅜ in male||¼ in male|
|7||⅜ in female||¼ in female|
|08 5||½ in male||¼ in male|
|1||20 series (Flowell) 6|
|2||Super Pillar Type 7|
|71||Super Pillar 300 P series|
|72||Super Pillar 300 P series L type|