1. Home/
  2. Oil & Gas/
  3. Midstream/
  4. Midstream Process Water /
  5. Marksman™ NXA Series Filter Elements
Marksman™ NXA Series Filter Elements product photo Primary L

Marksman™ NXA Series Filter Elements

High Capacity Melt Blown Depth Filter Elements


  • New, larger cartridge geometry
  • Same proprietary CoLD Melt™ fiber technology used in Pall’s Nexis® series filters
  • Gradient pore structure
  • Absolute rated at 99.9% efficiency with retention ratings from 4.3 to 72 micron (μm)
  • Available to fit most Size 1 and Size 2 bag vessels with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Pall vessels
  • Inside-out flow traps contaminant inside the high capacity filter element
  • Unique sealing device adjusts to fit in most conventional bag filter vessels
  • Quick, easy change-outs
Read More


Contact Us
* Required

설명

High Capacity Melt Blown Depth Filter Elements


  • New, larger cartridge geometry
  • Same proprietary CoLD Melt™ fiber technology used in Pall’s Nexis® series filters
  • Gradient pore structure
  • Absolute rated at 99.9% efficiency with retention ratings from 4.3 to 72 micron (μm)
  • Available to fit most Size 1 and Size 2 bag vessels with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Pall vessels
  • Inside-out flow traps contaminant inside the high capacity filter element
  • Unique sealing device adjusts to fit in most conventional bag filter vessels
  • Quick, easy change-outs

규격사양

Performance Specifications

Filter grades

5, 10, 20, 40, 70 micron (μm)

Maximum operating differential pressure

to 2.9 bard @ 20°C (42 psid @ 68°F)
to 1.0 bard @ 79°C (15 psid @ 175°F)
NOTE: Stainless steel flange recommended for temperatures in excess of 43°C (110°F).

Recommended change-out differential pressure1

2.4 bard @ up to 54°C (35 psid @ up to 130°F)

Food and water contact use

Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

Cartridges do not use adhesives and silicones2 (fluorocarbon elastomer and nitrile gaskets excluded).

Sanitization

Contact Pall Corporation for assistance.

Product Specifications

Materials

Filter media: Polypropylene/polyethylene
Hardware: Polypropylene
Gaskets: EPDM, fluorocarbon elastomer, nitrile
Sealing: Thermal bond


Dimensions (nominal)

Outside flange diameter: Three diameters are available. Contact Pall for information on sizes.
Outside filter diameter: 15.2 cm (6 in)
Lengths: Size 1
Size 2
Size 4 - 101.6 cm (40 in)
1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 Elements do not come into contact with silicone, silicone containing items, or adhesives during manufacturing.

성능

Typical Flow

 
Filter
Grade		 mbard/lpm (psid/gpm) Water @ 20°C (68°F) mbard/lpm (psid/gpm) Fluid with 40 cps viscosity
Size 1 Size 2 40 in Size 1 Size 2 40 in
5 2.058
(0.113)		 0.892
(0.049)		 0.565
(0.031)		 34.242
(1.880)		 16.593
(0.911)		 10.655
(0.585)
10 0.856
(0.047)		 0.382
(0.021)		 0.237
(0.013)		 21.310
(1.170)		 6.375
(0.350)		 4.098
(0.225)
20 0.291
(0.016)		 0.127
(0.007)		 0.073
(0.004)		 8.925
(0.490)		 3.096
(0.170)		 1.985
(0.109)
40 0.127
(0.007)		 0.055
(0.003)		 0.036
(0.002)		 3.279
(0.180)		 1.038
(0.057)		 0.674
(0.037)
70 0.073
(0.004)		 0.018
(0.001)		 0.018
(0.001)		 1.821
(0.100)		 0.729
(0.040)		 0.474
(0.026)
 

Particle Removal Ratings3 (μm)

 
Cartridge
Designation		 90%
Efficiency		 ≥99.9%
Efficiency
NXAM 5 2.5 4.3
NXAM 10 5.5 9.2
NXAM 20 13 17
NXAM 40 20 35
NXAM 70 51 72
 

 
NOTE: For kPa, multiply mbard/lpm by 0.1000. 
3 Marksman NXA series filter cartridge retention ratings are based on Pall’s Dynamic Efficiency test protocol. This single pass, destructive challenge test is based on ASTM F-795 test procedures for determining the performance of a filter medium. Fine test dust is used as the test contaminant for filters in the 1 to 20 micron range. Coarse test dust is used for micron ratings above 20 micron. Additional information can be obtained by contacting Pall Corporation.

종류

Large Format Filters

주문정보

Pall Part Number = NXAM [1] [2] - [3] U [4] - [5] [6]

Table 1

 
Code Length option
Blank Standard
 

Table 2

 
Code Filter grades (μm)
5 5
10 10
20 20
40 40
70 70
 

Table 3

 
Code Cartridge lengths nominal
1 Size 1 bag
2 Size 2 bag
4 101.6 cm (40 in)
 

Table 4

 
Code Gasket materials
Blank For NF version
N Nitrile
E EPDM (peroxide cured)
V Fluorocarbon elastomer
 

Table 5

 
Code End configurations
PF Plastic self-adjusting flange
SF Stainless steel self-adjusting flange (required for temperatures >43°C/110°F)
NF No flange (for use with reusable SS flange)
 

Table 6

 
Code Flange/gasket styles4
A Pall Marksman Series vessels, Rosedale5, Strainrite, Krystil Klear6
B FSI BFNP Series vessels (side entry), GAF7
C FSI FSPN Series vessels (prior to June 2012), Hayward8 over the top 
F FSI FSPN Series vessels (from June 2012)
CB FSI CBFP Series vessels 
 

4 
Pall Marksman "Fit-up" kits are available to help select the best sealing flange/gasket style. Contact your Pall representative for more information.

5 Rosedale is a registered trademark of Rosedale Products, Inc. 
6 Krystil Klear is a registered trademark of Pentair Water Filtration.
7 GAF is a registered trademark of GAF Corporation.
8 Hayward is a registered trademark of Hayward Industrial Products, Inc.

적용분야

LNG Acid Gas, Midstream Process Water, Refinery Amine Systems, Upstream Injection Water & SRU, Midstream Acid Gas, Midstream Glycol Filtration

영역

Midstream, Midstream, Refinery, Upstream, Midstream, Midstream

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.