설명
Upgrade elements for Parker Filter housings to Pall Ultipor® III or Dirt-Fuse® Filter Media
Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.
Pall-Fit elements allow you to use Pall Ultipor filters in your existing filter housings. Ultipor filters optimize efficiency and service life, while maintaining low differential pressure and high strength. This allows you to economically achieve superior system cleanliness for maximum protection.
규격사양
Filter Medium:
Inert inorganic fibers, impregnated and bonded with epoxy resin.
Filter Construction:
Ultipor III – Upstream and downstream nylon support mesh. Each pleat firmly bonded to helical wrap for superior stability.
Dirt-Fuse – Upstream and downstream wire support mesh.
Filter Element Hardware:
Corrosion protected steel end caps and core. Grommet seals on 2252 series.
Fluid Compatibility:
(per ISO 2943)
Compatible with petroleum oils, water-glycols, water-oil emulsions, and HWCF.
Use fluorocarbon seals for industrial phosphate esters, diesters, and specified synthetics.
Temperature range:
Nitrile seals -45°F to 225°F
Fluorocarbon seals -20°F to 250°F
140°F max. in water based fluids.
Collapse Pressure Rating:
(per ISO 2941)
150 psid – 2252 Series
290 psid – 9020, 9700 Series
3000 psid – 9021, 9701 Series
Multipass Filtration Ratings:
(per ISO 16889)
Inert inorganic fibers, impregnated and bonded with epoxy resin.
Filter Construction:
Ultipor III – Upstream and downstream nylon support mesh. Each pleat firmly bonded to helical wrap for superior stability.
Dirt-Fuse – Upstream and downstream wire support mesh.
Filter Element Hardware:
Corrosion protected steel end caps and core. Grommet seals on 2252 series.
Fluid Compatibility:
(per ISO 2943)
Compatible with petroleum oils, water-glycols, water-oil emulsions, and HWCF.
Use fluorocarbon seals for industrial phosphate esters, diesters, and specified synthetics.
Temperature range:
Nitrile seals -45°F to 225°F
Fluorocarbon seals -20°F to 250°F
140°F max. in water based fluids.
Collapse Pressure Rating:
(per ISO 2941)
150 psid – 2252 Series
290 psid – 9020, 9700 Series
3000 psid – 9021, 9701 Series
Multipass Filtration Ratings:
(per ISO 16889)
성능
Technical Information
Pall Media Grade | µm Rating for ß Value ß=200 | µm(c) Rating for ß Value | ||||||||||
ß=2 | ß=10 | ß=75 | ß=100 | ß=200 | ß=1,000 | |||||||
Ultipor III | ||||||||||||
KP | 3 | <2 | <2 | 3.1 | 3.3 | 3.8 | 5 | |||||
KN | 6 | 2.1 | 3.4 | 5.0 | 5.2 | 5.7 | 7 | |||||
KS | 12 | 3.2 | 5.5 | 8.3 | 8.7 | 9.7 | 12 | |||||
KT | 25 | 7.2 | 11 | 15.8 | 16.5 | 18.2 | 22 | |||||
Dirt-Fuse | ||||||||||||
DP | 3 | <2 | <2 | 3.0 | 3.2 | 3.8 | 5 | |||||
DT | 17 | 3.3 | 6.3 | 10.1 | 10.7 | 12 | 15 | |||||
종류
Filter Cartridges
주문정보
Parker Housing Model No. Reference | Pall Element Part No. | Dimensions (ref.) | DP Factors (psid/gpm -150 SUS) | |||||
---|---|---|---|---|---|---|---|---|
OD | Length | ID | KP | KN | KS | KT | ||
RF2-1, IL2-1, DIL2-1 | HC2252F**10H | 3.6 | 9.30 | 1.72 | N/A | 0.13 | N/A | N/A |
RF2-2, IL2-2, DIL2-2 | HC2252F**19H | 3.6 | 18.60 | 1.72 | N/A | 0.06 | N/A | N/A |
15P-1 | HC9020F**4H | 1.8 | 4.47 | 1.00 | 0.82 | 0.54 | 0.35 | 0.21 |
15P-2 | HC9020F**8H | 1.8 | 8.20 | 1.00 | 0.41 | 0.27 | 0.18 | 0.11 |
50P-1 | HC9700F**9H | 3.9 | 9.25 | 1.60 | 0.11 | 0.08 | 0.06 | 0.04 |
50P-2 | HC9700F**18H | 3.9 | 18.50 | 1.60 | 0.05 | 4.00 | 0.03 | 0.02 |
Above elements, media grades (**) KP, KN, KS, and KT, are all used in housings with bypass valves. |
Parker Housing Model No. Reference | Pall Element Part No. | Dimensions (ref.) | DP Factors (psid/gpm -150 SUS) | |||||
---|---|---|---|---|---|---|---|---|
OD | Length | ID | DP | DT | ||||
15P-1 | HC9021F**4H | 1.8 | 4.47 | 1.00 | 2.71 | 0.68 | ||
15P-2 | HC9021F**8H | 1.8 | 8.20 | 1.00 | 1.35 | 0.34 | ||
50P-1 | HC9701F**9H | 3.9 | 9.25 | 1.60 | 0.38 | 0.10 | ||
*Dirt-Fuse elements, media grades (**) DP and DT, are used in non-bypass housings. |
적용분야
Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Pulp&Paper Bleach Chemical Prep, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water
영역
Automotive, Mobile OEM, Primary Metals, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, General Industrial, General Industrial, General Industrial, General Industrial
Reviews
We'd like your opinion! Rate and review this item