IDL Series Single Cartridge Filter Housing product photo Primary L

IDL Series Single Cartridge Filter Housing

  • Single cartridge filter housings accept double open-end, RF and 1001 style filters when appropriate model is selected
  • All wetted parts are made of stainless steel construction
  • Accepts 1 in. (2.54 cm), 4 in. (10.2 cm), 10 in. (25.4 cm), 20 in. (50.8 cm), and 30 in. (76.2 cm) lengths
  • V-Band clamp features a quick opening T-handle
  • Variety of inlet/outlet sizes and o-ring seal options
  • Optional mounting brackets available

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)



Contact Us
* Required

Documents

Datasheets

Download: English

Description

  • Single cartridge filter housings accept double open-end, RF and 1001 style filters when appropriate model is selected
  • All wetted parts are made of stainless steel construction
  • Accepts 1 in. (2.54 cm), 4 in. (10.2 cm), 10 in. (25.4 cm), 20 in. (50.8 cm), and 30 in. (76.2 cm) lengths
  • V-Band clamp features a quick opening T-handle
  • Variety of inlet/outlet sizes and o-ring seal options
  • Optional mounting brackets available

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Specifications

Housing Specifications

Design ratings1

V-band Clamp Design:
260 psig (17.9 bar) @ 100 °F (40 °C)
200 psig (13.8 bar) @ 300 °F (150 °C)
114 psig (7.9 bar) @ 347 °F (175 °C)2

NOTE: Above ratings apply to housing only. Cartridge and housing O-ring selection may impose different and narrower limitations. If Canadian registration is required refer to IDLC Data Sheet PIIDLCEN for CRN approved filter housings.

Materials of construction

Head: 316L stainless steel
Bowl: 316 stainless steel

Connections

Inlet/Outlet: 34" NPT, 1" NPT, 34" BSPT, 1" BSPT, 1" BSPP
Flange Option: 150 lb. ANSI raised face flanges or BS4504 flanges available for 1 in. IDL
Housings Vent/Drain: 14" NPT, BSPT or BSPP (refer to ordering information for complete details)

Shell O-rings

FEP encapsulated fluorocarbon elastomer, silicone elastomer, fluorocarbon elastomer, nitrile, ethylene propylene, ethylene propylene for steam service

Bracket option

Stainless steel brackets are available as a standard option.

1 Fully vacuum rated.
2 For continuous steam service


Dimensional Data

 
Model Flow3 Rate (gpm/lpm) Dimensions Volume Weight Empty
A B C D Threaded Nozzle Flanged Nozzle
in./mm in./mm in./mm in./mm Gal/L lbs/Kg lbs/Kg
IDLD01 1/3.78 5.81/147.57 4.81/122 9.81/250 3.75/95.25 0.41/.15 4.5/2.0 ————
IDLD04 4/15 8/203 4.81/122 9.81/250 6/153 0.11/0.4 5.1/2.3 11.9/5.4
IDLD1 10/38 14.25/362 4.81/122 9.81/250 12.63/321 0.34/1.3 5.7/2.6 12.5/5.7
IDLD2 20/76 24.25/516 4.81/122 9.81/250 22.5/572 0.74/2.8 6.7/3 13.5/6.1
IDLD3 30/114 34.25/870 4.81/122 9.81/250 32.38/822 1.14/4.3 7.7/3.5 14.5/6.6
IDL101 1/3.78 5.81/147.57 4.81/122 9.81/250 3.75/95.25 0.41/.15 4.5/2.0 ————
IDL104 4/15 8/203 4.81/122 9.81/250 6/153 0.11/0.4 5.1/2.3 11.9/5.4
IDL11 10/38 14.25/362 4.81/122 9.81/250 12.63/321 0.34/1.3 5.7/2.6 12.5/5.7
IDL12 20/76 24.25/516 4.81/122 9.81/250 22.5/572 0.74/2.8 6.7/3 13.5/6.1
IDL13 30/114 34.25/870 4.81/122 9.81/250 32.38/822 1.14/4.3 7.7/3.5 14.5/6.6
 
3 - Dependent on inlet/outlet selection.


Single Cartridge Filter Housing Diagram

Performance

Housing Differential Pressure vs. Liquid Flow Rate



Housing Differential Pressure vs. Air Flow Rate



For liquids other than water, multiply differential pressure by specific gravity.

Type

Housings, Vessels, or Assemblies

Ordering Information

Pall Part Number = IDL [1] [2] G [3] [4] [5]

Table 1

 
Code Cartridge style
D DOE/RF V-band
1 1001 V-band
 

Table 2

 
Code Bowl length
01 1 in. (available in N16 and B16 option only)
04 4 in.
1 10 in.
2 20 in.
3 30 in.
 

Table 3

 
Code Inlet/outlet and vent/drain size
N12 34" NPT/14" NPT
N16 1" NPT/ 14" NPT
B12 34" BSPT/14" BSPT
B16 1" BSPT/14" BSPT
B17 1" ANSI flange /14" BSPT
N17 1" ANSI flange /14" NPT
P17 1" ANSI flange /14" BSPP
P19 1" BSPP /14" BSPP
B35 1" BS4504 flange /14" BSPT
P35 1" BS4504 flange /14" BSPP
 

Table 4

 
Code Housing options
Blank Blank
C2 Passivated
C9 Cleaned for oxygen service
 

Table 5

 
Code Seal materials
H Fluorocarbon elastomer
H1 FEP encapsulated fluorocarbon elastomer
H4 Silicone
H13 Nitrile
J Ethylene propylene
J7 Ethylene propylene for continuous steam service
 

Reviews

We appreciate your review of this product. Please login to your account to leave a review.