For Particle and Gel RemovalProfile Star filter cartridges are pleated depth filters designed for high particle removal efficiency in food and beverage applications.
The Profile Star filter cartridge combines the advantages of a continuously graded pore structure and a unique pleated geometry to provide an increase in effective filtration area and service life.
The pressure drop and flow capability is comparable to competitive pleated polypropylene filters whilst also providing excellent removal of soft contaminants (e.g. gels) because of the depth of the medium.
|Fixed fiber matrix|| |
|Unique pleated medium with no sideseal|| |
|Polypropylene filter construction with no adhesives or surfactants|| |
Food Contact CompliancePlease refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.
Materials of Construction
|Cage, Core, Fin End and End Cap||Polypropylene|
|Adaptor||Polypropylene with stainless steel reinforcing ring|
|O-Ring Seal||Silicone Elastomer Ethylene Propylene Rubber|
Technical InformationThe technical information provided is based on controlled laboratory tests done on typical production filters at the conditions described, unless otherwise indicated. Actual operating conditions may affect the filter's performance.
Operating Characteristics in Compatible Fluids1
|Maximum Differential Pressure||Operating Temperature|
|5.0 bard (72 psid) (forward)||<50 °C (122 °F)|
|3.4 bard (50 psid) (forward)||<80 °C (176 °F)|
|0.3 bard (5 psid) (forward)||<125 °C (257 °F)|
1 Fluids which do not swell, soften or adversely affect any of the filter components
Typical Flow Rates2
2 Typical initial clean delta p per 254 mm (10 inch) cartridge, water at 20 °C (68 °F). For liquids with viscosity greater than 1 cP, multiply the delta p by the viscosity.
Sterilization and Sanitization3
|Steam Sterilization||125 °C (257 °F)||10 hours|
|Hot Water Sanitization||80 °C (176 °F)|
3 For applications requiring in situ sterilization or sanitization Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use.
- Cartridges produced in a controlled environment
- Manufactured according to ISO 9001:2008 certified Quality Management System
Part Number: AB [Table 1] [Table 2] [Table 3] W [Table 4]
Example Part Number: AB3A0307WH4
See bold reference codes in tables.
Table 1: Nominal Length
|1||254 mm (10")|
|2||508 mm (20")|
|3||762 mm (30")|
|4||1016 mm (40")|
Table 2: Removal Rating4
|Grade||Rating (μm) at 99.98% Efficiency (ß-5000)5||Rating (μm) at 99% Efficiency (ß-100)|
4 Profile Star filter cartridge liquid retention ratings are based on a modified OSU-F2 single pass test.
5 The A010 grade has a 99.8% removal efficiency. Asterisks indicate extrapolated values.
Table 3: Adaptor
|3||SOE - single open end with flat closed end and external 222 O-rings|
|7||SOE - single open end with fin end, 2 locking tabs and external 226 O-rings|
|8||SOE - single open end with fin end and external 222 O-rings|
|28||SOE - single open end with fin end, 3 locking tabs and external 222 O-rings|
Table 4: O-ring Seal Material
|J||Ethylene Propylene Rubber|
Beer (Craft/Micro Breweries)