Marksman™ PFT Series Filter Elements product photo Primary L

Marksman™ PFT Series Filter Elements

High Capacity Pleated Polypropylene Filter Elements
  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life
  • All polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Products in this datasheet may be covered by one or more patents, including US 7,473,360.


* Required
Need Help?
Download Datasheet
Description
High Capacity Pleated Polypropylene Filter Elements
  • New, larger cartridge geometry
  • High flow capacity
  • Poly-Fine® II proprietary media for highly consistent filtration
  • Inside-out flow traps contaminant inside the element
  • Available to fit most Size 1 and Size 2 bag housings with no hardware changes
  • Available in 101.6 cm (40 in) for use in unique 101.6 cm (40 in) Marksman housings
  • Unique sealing device adjusts to fit in most bag filter housings
  • High surface area for long service life
  • All polypropylene construction
  • Wide chemical compatibility
  • Short length option to accommodate shorter baskets

For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)

Products in this datasheet may be covered by one or more patents, including US 7,473,360.
Specifications

Product Specifications

Materials of construction

Filter media: Polypropylene
Hardware: Polypropylene
Support material: Polypropylene
Gaskets: EPDM, fluorocarbon elastomer, nitrile
Sealing: Thermal bond

Dimensions (nominal)

Outside flange diameter: Three diameters are available.Contact Pall for information on sizes.
Outside filter diameter: 15.2 cm (6 in)
Lengths: Size 1 - Standard, Short
Size 2 - Standard, Short, Extra Short
Size 4 - 101.6 cm (40 in)
Performance

Performance Specifications

Filter grades

1, 3, 5, 10, 20, 40, 70, 90, 150 micron (µm)

Maximum operating differential pressure

to 5.2 bard @ 20°C (75 psid @ 68°F)
to 2.4 bard @ 74°C (35 psid @ 165°F)

NOTE: Stainless steel flange recommended for temperatures in excess of 43°C (110°F).

Recommended change-out differential pressure1

2.4 bard @ up to 54°C (35 psid @ up to 130°F)

Food and water contact use

Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Purity

Cartridges do not use surfactants, binders, and adhesives.

Sanitization

Contact Pall Corporation for assistance.


Particle Removal Ratings2 (µm)

 
Cartridge Designation 90% Efficiency ≥99.9% Efficiency
PFTM 1 1 -
PFTM 3 2 -
PFTM 5 - 5
PFTM 10 - 9
PFTM 20 - 15
PFTM 40 20 -
PFTM 70 - 70
PFTM 90 57 -
PFTM 150 - 145
 

Typical Flow

 
Filter Grade mbard/lpm (psid/gpm) Water @ 20°C (68°F)
Size 1 Size 2 40 in Size 1
(short)
Size 2
(short)
1 0.838
(0.046)
0.364
(0.020)
0.273
(0.015)
0.765
(0.042)
0.328
(0.018)
3 0.346
(0.019)
0.164
(0.008)
0.109
(0.006)
0.310
(0.017)
0.128
(0.007)
5 0.109
(0.006)
0.054
(0.003)
0.018
(0.001)
0.109
(0.006)
0.054
(0.003)
10 0.054
(0.003)
0.018
(0.001)
0.018
(0.001)
0.054
(0.003)
0.018
(0.001)
20 0.036
(0.002)
0.018
(0.001)
0.018
(0.001)
0.036
(0.002)
0.018
(0.001)
40 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.036
(0.002)
0.018
(0.001)
70 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
90 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
150 0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
0.018
(0.001)
 

NOTE: For kPa, multiply mbard/lpm by 0.1.
Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
Marksman PFT series filter cartridge retention ratings are based on Pall's Dynamic Efficiency test protocol. This single pass, destructive challenge test is based on ASTM F-795 test procedures for determining the performance of a filter medium. Fine test dust is used as the test contaminant for filters in the 1 to 20 micron range. Coarse test dust is used for micron ratings above 20 micron. Additional information can be obtained by contacting Pall Corporation. NOTE: PFTM grade designations for 1, 3, 40, and 90 based on Beta 10 values, and all other grade designations are based on Beta 1000 values.
Type
Cartridges and Elements
Use
Filtration, Polishing, Prefiltration, Removal
Ordering Information

Pall Part Number = PFTM [1] [2] - [3] U [4] - [5] [6]


Table 1

 
Code Short length option
Blank Standard
S Short
XS Extra short 3, 4
 

Table 2

 
Code Filter grades (µm)
1 1
3 3
5 5
10 10
20 20
40 40
70 70
90 90
150 150
 

Table 3

 
Code Cartridge lengths nominal
1 Size 1 bag
2 Size 2 bag
4 101.6 cm (40 in)
 

Table 4

 
Code Gasket materials
Blank For NF version
N Nitrile
E EPDM (peroxide cured)
V Fluorocarbon elastomer
 

Table 5

 
Code End configurations
PF Plastic self-adjusting flange
SF Stainless steel self-adjusting flange (required for temperatures >43°C/110°F)
NF No flange (for use with reusable SS flange)
 

Table 6

 
Code Flange/gasket styles5
A Pall Marksman Series housings, Rosedale6,Strainrite, Krystil Klear7
B FSI BFNP Series housings (side entry), GAF8
C FSI FSPN Series housings (prior to June 2012 using a square counter bore), Hayward9 over the top
 

3 Size 2 (only).
Select “XS" for Extra Short, “2" for Size 2 bag, and add “68" to the end of the part number (e.g., PFTMXS1-2UN-PFC 68).
5 For FSI FSPN Series housings (and other over the top housings) and FSI CBFP Series housings (side entry), consult your Pall FSI sales representative for proper flange/gasket style.
6 Rosedale is a registered trademark of Rosedale Products, Inc.
7 Krystil Klear is a registered trademark of Pentair Water Filtration.
8 GAF is a registered trademark of GAF Corporation.
Hayward is a registered trademark of Hayward Industrial Products, Inc.
Application
Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Fuel, Heavy Hydraulic, Heavy Hydraulic, Heavy Lubrication, Heavy Lubrication, Medium & Light Fuel, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Hydraulic, Medium & Light Lubrication, Medium & Light Lubrication, Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Hydraulic, Heavy Lubrication, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling, Non Contact, Quenching / Cleaning, Roll Bite (Safety Filter), Shape + Material Handling, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water
Segment
Automotive
General Industrial
Industrial and Mobile OEM
Mining
Primary Metals
Pulp & Paper