Profile® II Depth Filters for CMP Applications

High-Efficiency Depth Filters for CMP Application Filtration

Profile II depth filter cartridges for chemical mechanical processing (CMP) applications effectively remove agglomerated particles and gels from oxide, tungsten and copper slurries without disturbing particle distribution. The steep efficiency curves in these filters result in minimal strip-out of desirable slurry particles while sharply increasing the removal of oversized particles.

Order Products

Cartridge Length (Imperial)

4 in

Product Type

Filter Cartridges

Product Use

Pre-Filtration

Filter Media

Polypropylene

NXA 1-4U-M3S product photo

Nexis, NXA, 1 μm, 10.2 cm (4 in), SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0), Silicone gasket

Product ID: NXA14UM3S
Unit of Measure
1/EA
Min Order Qty
1
Micron
1 micron
NXA 20-4U-M3E product photo

Nexis, NXA, 20 μm, 10.2 cm (4 in), SOE flat closed end, external 222 O-rings (retrofits other manufacturers’ Code 0), EPDM gasket

Product ID: NXA204UM3E
Unit of Measure
1/EA
Min Order Qty
1
Micron
20 micron
NXT 1-4U product photo

Nexis, NXT, 1 μm, 10.2 cm (4 in), DOE industrial (no end caps)

Product ID: NXT14U
Unit of Measure
1/EA
Min Order Qty
1
Micron
1 micron
Nexis® T Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 4 inches product photo

Nexis® T Filter Cartridges, Removal Rating 50 μm, Polypropylene, Length 4 inches

Product ID: NXT504U
Unit of Measure
30/EA
Min Order Qty
30
Micron
50 micron
4 Items
  • 1

Description

Why choose CMP depth filter cartridges?

These depth filters are available in removal ratings from 0.2 to 40 µm, which are five to 10 times finer than traditional depth filter ratings. They also include a continuously profiled pore structure for built-in prefiltration.

Applications

Microelectronics:

  • Chemical mechanical processing (CMP)

Specifications

*Please refer to the documentation for additional specifications.

 

Removal Ratings

 

  • 0.2 µm, 0.3 µm, 0.5 µm, 1 µm, 3 µm, 5 µm, 10 µm, 20 µm, 30 µm and 40 µm 

 

Pressure Drop vs. Liquid Flow Rate1

 

1 For liquids with viscosities differing from water, multiply the pressure drop by the viscosity in centipoise.

Documents

Data Sheets

  • Profile® II Filters for CMP Applications

    Select Language :
    English