Order Products
Nominal OD (Imperial)
1.99 in
ELEMENT CORALON HCT200FCS04H
1/EA
1
ELEMENT CORALON HCT200FCT04H
1/EA
1
The Marksman™ DFN Series Filters are high-capacity pleated glass fiber filter elements with a new, large cartridge geometry. The filters come with micro-fiberglass Duo-Fine® media and an inside-to-outside flow pattern that traps the contaminants inside the element.
Features and Benefits:
Nominal OD (Imperial)
1.99 in
The Marksman DFN Glass Fiber Filter Elements are used in the following industries –
Materials of construction
Filter media: Borosilicate micro fiberglass with acrylic binder
Hardware: Polypropylene end caps and outer netting
Support material: Spunbonded polyester
Gaskets: EPDM, fluorocarbon elastomer, nitrile
Sealing: Thermal bond
Dimensions (nominal)
Outside flange diameter: Five flange options are available . Contact Pall for information on sizes.
Outside filter diameter: 15.2 cm (6 in.)
Lengths: Size 1, Size 2, Size 4 - 101.6 cm (40 in.)
Performance Specifications:
Filter grades
1.5, 3, 10, 20, 40 micron (µm)
Maximum operating differential pressure
NOTE: Stainless steel flange is recommended for temperatures in excess of 43 °C (110 °F).
Recommended change-out differential pressure1
2.4 bard @ up to 54°C (35 psid @ up to 130°F)
Particle Removal Ratings2 (µm)
Cartridge Designation |
90% Efficiency |
≥ 99.9% Efficiency |
---|---|---|
DFNM 1.5 | 0.9 | 1.6 |
DFNM 3 | 1 | 1.9 |
DFNM 10 | 2.8 | 9.3 |
DFNM 20 | 9.5 | 17 |
DFNM 40 | 17 | 37 |
Typical Flow
Filter Grade |
mbard/lpm (psid/gpm) Water @ 20 °C (68 °F) |
||
---|---|---|---|
Size 1 | Size 2 | 40 in. | |
1.5 | 0.21 -0.011 |
0.09 -0.005 |
0.05 -0.003 |
3 | 0.09 -0.005 |
0.04 -0.002 |
0.02 -0.001 |
10 | 0.06 -0.003 |
0.03 -0.001 |
0.02 -0.001 |
20 | 0.04 -0.002 |
0.02 -0.001 |
0.02 -0.001 |
40 | 0.04 -0.002 |
0.02 -0.001 |
0.02 -0.001 |
NOTE: For kPa, multiply mbard/lpm by 0.1.
1 Provided that the maximum differential pressure is not exceeded based on temperature limits defined above.
2 Marksman DFN series filter cartridge retention ratings are based on Pall’s Dynamic Efficiency test protocol. This single-pass, destructive challenge test is based on ASTM F-795 test procedures for determining the performance of a filter medium. Fine test dust is used as the test contaminant for filters in the 1 to 20 micron range. Coarse test dust is used for micron ratings above 20 microns. Additional information can be obtained by contacting Pall Corporation.
Pall Part Number = DFNM [1] [2] – [3] U [4] – [5] [6]
Table 1
Code | Length option |
---|---|
Blank | Standard |
Table 2
Code | Filter grades (µm) |
---|---|
1.5 | 1.5 |
3 | 3 |
10 | 10 |
20 | 20 |
40 | 40 |
Table 3
Code | Cartridge lengths nominal |
---|---|
1 | Size 1 bag |
2 | Size 2 bag |
4 | 101.6 cm (40 in.) |
Table 4
Code | Gasket materials |
---|---|
Blank | For NF version |
N | Nitrile |
E | EPDM (peroxide cured) |
V | Fluorocarbon elastomer |
Table 5
Code | End configurations |
---|---|
PF | Plastic self-adjusting flange |
SF | Stainless steel self-adjusting flange (required for temperatures >43 °C/110 °F) |
NF | No flange (for use with reusable SS flange) |
Table 6
Code | Flange/gasket styles3 |
---|---|
A | Pall Marksman Series vessels, Rosedale4, Strainrite, Krystil Klear5 |
B | FSI BFNP Series vessels (side entry), GAF6 |
C | FSI FSPN Series vessels (prior to June 2012), Hayward7 over the top |
F | FSI FSPN Series vessels (from June 2012) |
CB | FSI CBFP Series vessels8 |
3 Pall Marksman "Fit-up" kits are available to help select the best sealing flange/gasket style. Contact your Pall representative for more information.
4 Rosedale is a registered trademark of Rosedale Products, Inc.
5 Krystil Klear is a registered trademark of Pentair Water Filtration.
6 GAF is a registered trademark of GAF Corporation.
7 Hayward is a registered trademark of Hayward Industrial Products, Inc.
8 Installation of Marksman cartridge with CB flange requires an additional housing hold down plate as follows:
Part Number | Description |
---|---|
ERA286666C | CBFP 11/12 Hold-Down Plate, Stainless Steel, 2” Inlet |
ERA286667C | CBFP 11/12 Hold-Down Plate, Stainless Steel, 3” Inlet |
Q. 1. Do the Marksman DFN Series Filters require any hardware changes?
- The Marksman DFN Series Filters can fit most Size 1 and Size 2 bag vessels with no hardware changes.
Q. 2. What are the filter grade options available for Marksman DFN Series Filter Elements?
- The Marksman DFN Series Filter Elements are available in 1.5, 3, 10, 20, and 40 micron (µm) ratings.
Q. 3. Can I use the Marksman DFN Series Filter Elements for carbon fiber production?
- Yes, the Marksman DFN Series Filters are ideal for carbon fiber production.