Pallfit (competitor retrofit) Filter Elements

Pall-Fit Retrofit Filter Elements fit directly into the existing elements without the need to modify or change housing/vessel. These products are direct ‘drop-in’ replacements for existing elements and need very little effort from the operator. Pall-Fit Retrofit Filter Element designs bring together advanced manufacturing processes and industry-leading technologies to deliver unsurpassed performance and value to its users.

The Pall-Fit Retrofit Filter Elements are available in the following variants –

  • Pall-Fit Retrofit Elements for 3M High Flow Filters
  • Marksman™ 740 Series Filter Elements
  • New 3M 740 Retrofit Filter Element
  • Retrofit for Pentair Compax Filter Element
  • Peco GoldXtream Retrofit Filter Element 
Air Gas Vent Filters
Air Gas Vent Filters
Depth Filter Sheets
Depth Filter Sheets
Depth Filtration
Depth Filtration
Filter Capsules
Filter Capsules
Filter Cartridges
Filter Cartridges
Lenticular Filters
Lenticular Filters

Order Products

Product Use

Air, Gas, and Vent Filtration

AB1UVI3EHF

Product ID: AB1UVI3EHF
Unit of Measure
1/EA
Min Order Qty
1

Poly-Fine® ARD, Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: ARD1010UEM3
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.75 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.75 inches

Product ID: CLR12975
Unit of Measure
24/EA
Min Order Qty
24
Length
75.6 cm / 29.75 in
Micron
1 micron

Claris® Filter Cartridge, CLR120W480

Product ID: CLR120W480
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket O-Ring Code
Blank
See All Attributes

Claris® Filter Cartridge, CLR110W480

Product ID: CLR110W480
Unit of Measure
36/EA
Min Order Qty
36
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket O-Ring Code
Blank
See All Attributes

SUPRAdisc SD II 100 200X100C232SPW

Product ID: 7007872
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes

SUPRAdisc SD II 300 200X300C232SPW

Product ID: 7007876
Unit of Measure
1/EA
Min Order Qty
1
1. Recommended Max. Backpressure During Backwash
0.5 bar
2. Recommended Max. Backpressure During Backwash
7.25 psid
Adaptor Type
Double Open End, Flat Gasket
Core Drainage Discs
Polypropylene
Diameter (Imperial)
12 in
Diameter (Metric)
287 mm
See All Attributes
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 10 inches

Product ID: CLR1010
Unit of Measure
36/EA
Min Order Qty
36
Length
25.4 cm / 10 in
Micron
10 micron

Emflon® PFR Membrane in Novasip™ Capsules

Emflon® PFR Membrane in Novasip™ Capsules have lower installation costs than comparable systems. Its steam sterilizing durability provides a long service life and low maintenance costs. Novasip™ filters use polyethermide because of its strong withstanding features against elevated temperature and pressure. Designed with air and vent applications Novasip™ filters can be used in a range of operating conditions.

View Product »

Emflon® ll Membrane in Kleenpak™ Capsules

Emflon® II Membrane in Kleenpak™ Capsules serves the user's specific systematic needs. Pall offers options including gama-irradiatable, pre-sterilized and custom-made sets. All versions perform to the same top quality standard. Each unit is fully integrity testable and has the highly retentive Emflon II membrane. These capsule filters provide high air flows of both air and gas.

9 Products In Family

View Product »

AB2P20018JDUP

Product ID: AB2P20018JDUP
Unit of Measure
24/EA
Min Order Qty
24
SUPRAdisc SD II EK 1 200XEK1S232SP product photo

SUPRAdisc SD II EK 1 200XEK1S232SP

Product ID: 7005243
Unit of Measure
1/STK
Min Order Qty
1
75 Items

Description

Pall-Fit Retrofit Elements for 3M High Flow Filters

Pall’s Retrofit Elements for 3M High Flow Filters are available with multiple filtration grades, length, and seal options. With their laid-over-pleat design, these elements are designed to deliver optimum performance with maximum filtration surface area, uniform flow distribution, and uniform dirt buildup within the filtration medium for extended service life.

 

MarksmanTM  740 Series Filter Elements

MarksmanTM 740 Series Filter Elements offer broad chemical compatibility and economy of use. The filter elements provide high efficiency through their optimized axial pleat geometry for low flux and exceptional dirt-holding capacity, resulting in long on-stream life and low differential pressure.

 

New 3M 740 Retrofit Filter Element

New 3M 740 Retrofit Filter Elements are direct replacement options for existing elements in aggressive service applications.

 

Retrofit for Pentair Compax Filter Element

The Retrofit for Pentair Compax Filter Element offers direct replacement filter technology for refinery hydrocracker protection and other applications. The elements provide up to twice the service life depending on the application. 

 

Peco GoldXtream Retrofit Filter Element

The Peco GoldXtream Retrofit Filter Element allows users of other manufacturer’s elements to benefit from Pall technology without much hassle. The elements are ideal for various applications, including gas production, gas processing, water and wastewater applications, and hydrocarbon refining. 

 

 

Applications/Use

Pall’s Retrofit Filter Elements are used for the following applications in the oil and gas industries –

  • Filtration and odor adsorption
  • Solvents 
  • Alkylation
  • Hydrotreating
  • Catalysts  
  • Applications for refinery hydrocracker protection and other applications 
  • Gas production (Produced water)
  • Gas processing (Amine and glycol regeneration loops)
  • Water and wastewater (Raw water feeds, wastewater disposal, and release)
  • Hydrocarbon refining (Liquid feedstocks, amine regeneration, product polishing, water wash)

 

FAQs

Q. 1. What are the benefits of using Pall-Fit Retrofit Filter Elements?

Pall’s Retrofit Filter Elements are a direct retrofit for the existing elements. These filters allow the users to benefit from Pall technology through direct ‘drop in’ replacement for existing elements without the need to modify or change the housing/vessel. The filters are cost-effective and deliver unsurpassed performance and value. They’re an easy decision to make and need little effort from the operator.

 

Q. 2. What are the different variants available in Pall’s Retrofit Filter Elements?

Pall’s Retrofit Filter Elements are available in the following variants – 

  • Pall-Fit Retrofit Elements for 3M High Flow Filters
  • Marksman™ 740 Series Filter Elements
  • New 3M 740 Retrofit Filter Element
  • Retrofit for Pentair Compax Filter Element
  • Peco GoldXtream Retrofit Filter Element