Ultipleat® High Flow 1 Micron Element product photo Primary L

Ultipleat® High Flow 1 Micron Element

The 1 ®m Ultipleat® High Flow Element is a large diameter, coreless, single open ended, pleated PES filter element cartridge with an inside to outside flow pattern. The filter®s unique, crescent-shaped pleat geometry, combined with its large 6.3 inch (16 cm) diameter allows you to use fewer filters to remove fine particles and cysts in high flow applications.

Benefits
  • High flow rates per element
  • Low cost of installation and filtration
  • Fewer elements per change out
  • 1 ®m absolute* filtration
  • Polyethersulfone media provides greater than 3 log reduction®of Giardia oocysts and Cryptosporidium
  • Inside to outside flow configuration retains all particulate matter inside the element
  • Coreless, all plastic construction to minimize waste disposal
  • U-cup element seal ensures high level removal efficiencies

    * Particle Removal Rating



    Crescent-Shaped Pleat Geometry



Need Help?
Ask a Question
* Required

Documents

Datasheets

Download: English

Description

The 1 ®m Ultipleat® High Flow Element is a large diameter, coreless, single open ended, pleated PES filter element cartridge with an inside to outside flow pattern. The filter®s unique, crescent-shaped pleat geometry, combined with its large 6.3 inch (16 cm) diameter allows you to use fewer filters to remove fine particles and cysts in high flow applications.

Benefits
  • High flow rates per element
  • Low cost of installation and filtration
  • Fewer elements per change out
  • 1 ®m absolute* filtration
  • Polyethersulfone media provides greater than 3 log reduction®of Giardia oocysts and Cryptosporidium
  • Inside to outside flow configuration retains all particulate matter inside the element
  • Coreless, all plastic construction to minimize waste disposal
  • U-cup element seal ensures high level removal efficiencies

    * Particle Removal Rating



    Crescent-Shaped Pleat Geometry

Specifications

Performance Specifications

Water flow rate
20" length ® 68 gpm/psid (257 lpm/70 mbar)
40" length ® 135 gpm/psid (511 lpm/70 mbar)
60" length ® 204 gpm/psid (772 lpm/70 mbar)

Maximum forward differential pressure
50 psid @ 180®F (3.44 bar @ 82®C)

Maximum operating temperature
180®F (82®C)

Sanitization ®
  • Can be sanitized with hot water (185®-194®F/85®-90®C) for a maximum of 100 cycles®(1 cycle = 10 minutes) without compromising the removal efficiency of the filter.
  • Peracetic acid, chlorinated alkaline products and other sanitization chemicals may be used.®Contact Pall for recommended procedures.

    Product Specifications
    ®®®®®®®®® ®®®
    Materials of Construction
Filter Media:® ®1 ®m polyethersulfone
Outer Sleeve and End Caps:® ®Polypropylene
Drainage and Wrap:® ®Polypropylene
Wrap Adhesive: ®Polyolefin hot melt
Filter Seal: ®FDA compliant ethylene propylene

Dimensions

Diameter: 6.3" (16 cm)®
Length: 20", 40", 60"®(51 cm, 102 cm, 152 cm)

Other Ultipleat High Flow Elements
Ultipleat High Flow elements are available in other filter®media with absolute ratings of 2, 4.5, 10, 20, 40 and 100 ®m. Contact Pall for more information.

Housing Design
A single element, sanitary designed housing is available for use with the 1 ®m Ultipleat High Flow element.® Industrial style housings are also available. Contact Pall for more information.

®
®

Applications


®
Incoming water filtration
  • Barrier to cysts and oocysts
  • Prefilter for bottled water sterilizing filters
  • Food and beverage processes

Performance

1 ®m Ultipleat High Flow

Type

Large Format Filters

Ordering Information

Product Part Number:® HFU6 ®CAS010JUW

Code

Length
20 20" (51 cm)
40 40" (102 cm)
60 60" (152 cm)

Reviews

We'd like your opinion! Rate and review this item