Order Products
Brand
Seitz®
Product Type
Filter Sheets
Product Use
Craft Breweries, clarification
Seitz® HS Series Depth Filter sheet, HS 2000 600x612
50/EA
50
Seitz® HS Series Depth Filter sheet, HS 2000 400x400
100/EA
100
Filter sheets for craft breweries
The Seitz HS Series Depth Filter Sheets were developed to meet the production needs for various products including beer, gelatin, sweeteners and craft brewing industries, especially those with complex conditions and high filtration temperature. The high stability enables long production runs of aqueous and higher viscosity fluids at low and high temperatures. Available in multiple grades, the homogenous and consistent media is suitable for microbial reduction and applications requiring fine, clarifying, and coarse filtration. Get the quality your business deserves with the Seitz HS series of depth filter sheets and enjoy:
Product images are a representation of product family for illustration purposes only. Actual products may vary.
Brand
Seitz®
Product Type
Filter Sheets
Product Use
Craft Breweries, clarification
Fine filtration of beer for bacteria, yeast reduction and microorganism reduction in enzymes
For beer clarification and DE trap filtration, polishing filtration of thin broth gelatin, fine filtration of enzymes and clarification of thin broth gelatin
Prefiltration and coarse filtration of beer and clarification of thick broth gelatin and enzymes
Coarse filtration of enzymes
Relative Retention Rating1
1 Effective removal performance of filter sheets is dependent on process conditions.
Food Contact Compliance
Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.
Main Constituents
Cellulose, diatomaceous earth (DE, Kieselguhr), perlite
Characterization
Grade | Mass per Unit Area g/m2 |
Thickness mm |
Ash % |
Water Permeability2 L/m2/min (gal/ft2/min) |
---|---|---|---|---|
HS 200 | 1400 | 3.8 | 52 | 60 (15.8) |
HS 400 | 1450 | 3.9 | 49 | 100 (26.4) |
HS 800 | 1400 | 3.7 | 49 | 150 (39.6) |
HS 1000 | 1350 | 3.7 | 48 | 200 (52.8) |
HS 2000 | 1350 | 3.8 | 48 | 400 (105.6) |
HS 4000 | 1350 | 3.9 | 46 | 550 (224.5) |
HS 6000 | 1350 | 4.2 | 46 | 850 (224.5) |
HS 9000 | 1350 | 4.2 | 46 | 1550 (409.5) |
These figures have been determined in accordance with in-house test methods and the methods of the Technical / Analytical Work Group within the European Depth Filtration Association.
2The permeability was measured under test conditions with clean water at 20 °C (68 °F) and a Δp of 1 bar (14.5 psi).
Regeneration
Seitz HS series filter sheets may be rinsed with clean water (in the forward or reverse direction) to increase throughput and to optimize economic efficiency. Optimal regeneration of filter sheets installed in a plate and frame filter may be achieved with serial rinses of warm water followed by hot water. An example protocol is shown below.
The rinse flow rate should be equivalent to the filtration flow rate with a back pressure of 0.5 –1 bar (7.2 –14.5 psi).
3When rinsing in the reverse flow direction, it is critical to control particulate and microbial levels in the rinse water so that the sheet's filtrate side is not contaminated. Water used for reverse flow flushes should be particle-free, and if the filter will not be sterilized prior to re-use the water should be free of microbes. Backwashing should be in a diagonal direction from outlet to inlet in a plate and frame filter.
Sterilization and Sanitization
Method | Temperature °C (°F) | Maximum Differential Pressure bar (psi) |
Time4/Cycle min |
---|---|---|---|
Steam | 125 (257) | 0.5 (7.2) | 20 |
Hot Water | 90 (194) | 1 (14.5) | 30 |
4The actual time required may vary as a function of the process conditions.
Filtration Guidelines5
For achieving optimal filtrate quality, the following flow velocities and differential pressures should not be exceeded:
Grade | Description | Flow Velocity L / m2/h (gal/ft2/ h) |
Maximum Differential Pressure-bar (psi) |
---|---|---|---|
Seitz HS 200, Seitz HS 400 | Fine Filtration | 525 (12.9) | 1.5 (21.8) |
Seitz HS 800, Seitz HS 1000, Seitz HS 2000, | Polishing Filtration | 850 (20.9) | 3 (43.5) |
Seitz HS 4000, Seitz HS 6000, Seitz HS 9000 | Coarse Filtration | 850 (20.9) | 3 (43.5) |
5Please contact Pall for recommendations on your specific filtration process as results may vary by product, pre-filtration and filtration conditions.
For additional operating guidelines, including rinsing of sheets prior to use, please refer to instructions provided by Pall.
Quality