Vector™ High Flow Filter Cartridges

These polypropylene and polyester filter elements offer the following benefits – 

• High flow rate per filter cartridge
• A wide range of temperature and chemical compatibility 
• Up to 2x service life vs. comparable coarse large-volume filter elements
• Inside-to-outside flow pattern traps contaminants inside the element, thus preventing polluting the treated process liquid or gas during cartridge change-out 

 

Performance Specifications:

 

Filter grades

1, 5, 10, 25, 50, 100 µm

 

Maximum differential pressure

5.2 bard (75 psid) @ 20°C (68°F)

2.4 bard (35 psid) @ 74°C (165°F)

 

Maximum operating temperature¹

82°C (180°F) with typical polypropylene configuration

100°C (212°F) with typical polyester configuration²

 

Product Specifications:

 

Materials of construction

 

Filter media: Polyester, polypropylene

Hardware: Polypropylene, acetal

O-rings: EPDM, fluoropolymer elastomer,

silicone, Buna N, Teflon encapsulated

fluoropolymer elastomer

U-cup seals: Buna N, silicone, fluoropolymer

elastomer, Nordel³

 

Dimensions (nominal)

Outside Diameter: 152 mm (6 in)

Lengths: 508 mm (20 in), 1016 mm (40 in),

1524 mm (60 in), 2032 mm (80 in)

 

¹ With compatible fluids.

² The maximum operating temperature should not exceed 60°C (140°F) when using polyester media in aqueous solutions.

³ Nordel is a trademark of The Dow Chemical Company.

 

 

Pall Part Number = HFV 6 [1] [2] [3] [4] [5]

 

Table 1

Code	Cartridge lengths (mm/in)
20	508/20
40	1016/40
60	1524/60
80	2032/80

 

Table 2

Code	Media Type
PP	Polypropylene
PE	Polyester

 

Table 3

Code	Filter grades (µm)
001	1
005	5
010	10
025	25
050	50
100	100

 

Table 4

Code	Hardware
P	White polypropylene
A	Acetal Caps

 

Table 5

Code	Sealing material (O-ring /U-cup)
J	Nordel /EPDM O-ring
H	Fluoropolymer elastomer O-ring
H4	Silicone O-ring
H13	Buna N O-ring
H1	Teflon encapsulated fluoropolymer elastomer O-ring
H13U	Buna N U-cup
H4U	Silicone U-cup
HU	Fluoropolymer elastomer U-cup
JU	Nordel /EPDM U-cup

Q. 1. What is the filter grade range available for these polypropylene and polyester filter elements? 

- Polypropylene and polyester filter elements are available in 1, 5, 10, 25, 50, 100 µm ratings. 

 

Q. 2. What is the cartridge length options available for these polypropylene and polyester filter elements?

- The polypropylene and polyester filter elements are available in 20, 40, 60, and 80-inch variants. 

 

Q. 3. Do I need to take special care while using these polypropylene and polyester filter elements in aqueous solutions? 

- Yes, please note that the maximum operating temperature should not exceed 60°C (140°F) when using polyester media in aqueous solutions.

 

Q.4. What are the ISO certificates of the related Manufacturing plants ?

- The Vector High Flow element are produced in manufacturing site with ISO 9001:2015 and ISO 14001:2015 certificates